Jump to content
SAU Community

Recommended Posts

Can anyone get their hands on a drivers side head light for a DR30 Iron mask, had a slight bingle and smashed one. Need one desperatly as it goin in to get fixed soon.

jaustech is where i got mine from at S175 a pop that was a year and a have ago!

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

jaustech is where i got mine from at S175 a pop that was a year and a have ago!

$175.00 EACH?????

Shite! I just sold a front..... bonnet, both lights & grille for $350.00

Just Jap want $150.00 each for their's & a couple of years ago I was buying front nose cuts for $600.00. From these I got headlights, grille, lower skirt spoiler, front bumper, washer pump, radiator, thermo fans, a/c condensor and the front air dam that now appears on the Jenesis site.

Best I keep mine for spares, one day I might pick up a cheap DR cause the owner won't be able to repair it eh! hahahahahahahahaha

AND attached, maybe????? is the drawing for the short shifter conversion

??? thats what i through 2doors only for PN but his is full badged signed and has the interior!! hes not going to be happy about that! it runs the l20et so its not a dr either?? i also saw that 2door PN for sale which is what made me ask roy if there were 2door and 4door, i know of another PN that sold for $10000 on the other side of brizzy that is a 2door as well

If it's all badged and looks legit, it may be.

If it's an HR on the compliance plates on the firewall it could easily be, but we have never seen one out here.

Remember! there is a lot of cars in Japan that we don't know of & it's hard to believe someone would try to make a copy of a slug.

What you think?

Like to see a pic of it.

How you going with them plastic inlet snouts RSX.

with the paint i went to the nissan place here on the coast and they told me it should be on the manufactures plate on the fire wall, mines in japanese yours would be too! thats not to much help !! the black rocker cover with turbo on it does add that edge!

RSX,

You no read properly.

NO compliance plates on the firewall, not anywhere on the car.

84 model, imported in 97, under 15 year rule, not hard to work out why no compliance plates and a receipt saying 82 model.

Something else, if your not sure of the year of manufacture of your import, are you aware the year of manufacture is on your front brake hoses.

$175.00 EACH?????

Shite! I just sold a front..... bonnet, both lights & grille for $350.00

Just Jap want $150.00 each for their's & a couple of years ago I was buying front nose cuts for $600.00. From these I got headlights, grille, lower skirt spoiler, front bumper, washer pump, radiator, thermo fans, a/c condensor and the front air dam that now appears on the Jenesis site.

Best I keep mine for spares, one day I might pick up a cheap DR cause the owner won't be able to repair it eh! hahahahahahahahaha

AND attached, maybe????? is the drawing for the short shifter conversion

attach didn't work on my work pc but maybe on others! $175.00 was the price from JAUSTECH around 1.5 years ago each!! just jap were "R30 what" at that time so jaustech had them and that was good enough for me :rant:

attach didn't work on my work pc but maybe on others! $175.00 was the price from JAUSTECH around 1.5 years ago each!! just jap were "R30 what" at that time so jaustech had them and that was good enough for me :rant:

For Just Jap then, i'm not surprised.

But for the attachment, email me and I will give it to you that way, but it won't be any good to you, as you have an R31 RB turbo box.

Looking for an R33 GTS 25t Tailshaft, if anyone can help.

RSX,

You no read properly.

NO compliance plates on the firewall, not anywhere on the car.

84 model, imported in 97, under 15 year rule, not hard to work out why no compliance plates and a receipt saying 82 model.

Something else, if your not sure of the year of manufacture of your import, are you aware the year of manufacture is on your front brake hoses.

i throught you were talking english reading ones, sorry there, and i can only seem to get my hands on the snorkel thing for the l24e version, dig alittle deeper might be able to find the other one for you!! works got me in here 24/7 latley (bastards)

For Just Jap then, i'm not surprised.

But for the attachment, email me and I will give it to you that way, but it won't be any good to you, as you have an R31 RB turbo box.

Looking for an R33 GTS 25t Tailshaft, if anyone can help.

no don't bother with the attachment as its no good and i'm running the r32 box :boobies2:

hey all, who was asking about the L24E ECU?

I cant remember where, but i read that they are not very flexible, even as much as a lumpy cam effects some vacum signal, the ecu cant compensate for this and the engine wont idle properly.

Thats what i heard anyway.

Seriously the first mod anyone with a L24E should do is to cut a hole a in the airbox lid, it will make it sound totaly sweet, and it goes a little better too.

Also I recently stuffed my L24E, racing VN commodore, i was winning up to about 180kph and then it died. Pulled the head off and no 1&2 pistons and cylinders are shagged, starved for oil i think.

Anyhow, if anybody has any L series motor, or perhaps even a RB30 that runs. If you are willing to sell it please let me know.

Cheers, Mick.

Also I recently stuffed my L24E, racing VN  commodore, i was winning up to about 180kph and then it died.  Pulled the head off and no 1&2 pistons and cylinders are shagged, starved for oil i think.

Anyhow, if anybody has any L series motor, or perhaps even a RB30 that runs.  If you are willing to sell it please let me know.

Cheers, Mick.

PM stu-r30 as i think he has an rb30e for sale, what kind of km's did she have on her?

when i took my car for a spin on sat i put a VN to shame, got to thrid and backed off as had a car length and a 1/2 on him, don't think he knew what to think! also had 2 rotors take an interest as my car just burbals, like something with a large cam, didn't want to push me luck!!

unlike l's to run low on oil delivery. we cannot use spacers over here in NZ, unless they get certed :D

anyone here done the swap ? ive just put a frount mount on my hr30 and its toatly changed the whole car. soooo much more power :D. but the brakes are definitly not up to the task

Mick I've got a 180,000km RB30E sitting in the shed, was out of my R31 TI. Also have the computer and the auto box and computer that went with it. Runs well (well, it did before I took it out of the car...)

Took it out cos I found one for $450 that had had the hydraulic lifters replaced, and mine was starting to tick a bit (then when I took it out found out that the exhaust manifold studs were broken, as were the ones on the new engine, and the new engine ticked too... waste of a grand)

$300 ono if you want it, its in Adelaide

Also I recently stuffed my L24E, racing VN  commodore, i was winning up to about 180kph and then it died.  Pulled the head off and no 1&2 pistons and cylinders are shagged, starved for oil i think.

Anyhow, if anybody has any L series motor, or perhaps even a RB30 that runs.  If you are willing to sell it please let me know.

Cheers, Mick.

Mick,

Got an L20ET engine complete minus turbo bits for FREE.

In Syd, but frieght pretty cheap.

PM me to chat vabout it.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...