Jump to content
SAU Community

Recommended Posts

hi, all, I so just bought my second skyline last month, its 99 R34 GTT. the car came with a 3 inch FULL exhaust, a hks filter and teinz coilover suspension. Last week IS Motor Racing at Rockdale supplied and installed a G-readdy electronnic boost controller for me, did a tuning on the same day.(139.5 max power at wheel). The guy told me my car is pretty much in stock condition, and all the stock R34s are between 130kw - 150 kw, only brand new can do 206 kw, for a 10 yrs r34, any where between 130 - 150 kw is normal. then During the tuning, he tested 0.6 bar first, was ok. then he tried 0.8 bar twice, failed twice, the power or boost was like goes up then drop down. what he explained to me was the stock computer will cut the fuel off if over boosted and strongly suggested me to buy a power fc. At the end of day. the guy setted 0.6 as low boost, and 0.7 or 0.65 as high boost...

we all know 1 bar =14psi, so 0.6 = 8.4 and 0.8 = 11.2

my questions are

1. is 139.5kw sounds normal with above mods?? i searched Autospeed website, says there stock R34 can do around 140-150kw, then plus exhuast and filter can do 160-170, and 180-200 with power fc on top of all these. 139.5kw is just fxxk sad and much less, though i heard every dyno machine is different, differnt dyno machine can give you different KW.

2. anything wrong with the tuning?? stock computer should allow u to boost to a safe level without fuel cut, i searched formum, most of you can boost to 11 or 12 psi with same mods as i have.

dont know what happened to my car, really sad now, please help, thx for reading this, ai~~~~~~~ paid $18000 for a piece of shit

Link to comment
https://www.sau.com.au/forums/topic/258088-need-help-with-my-r34-gtt-plz/
Share on other sites

139.5rwkw is 186.93rwhp

not bad really.......

throw on a fmic and get a safc2 piggy back ecu if your on a budget

or get a full ecu, will see alot more power

and 1 bar of boost is 14.7 psi

example

my car went from 90rwhp to 245rwhp with just a tune

Edited by R32 Driver
hi, all, I so just bought my second skyline last month, its 99 R34 GTT. the car came with a 3 inch FULL exhaust, a hks filter and teinz coilover suspension. Last week IS Motor Racing at Rockdale supplied and installed a G-readdy electronnic boost controller for me, did a tuning on the same day.(139.5 max power at wheel). The guy told me my car is pretty much in stock condition, and all the stock R34s are between 130kw - 150 kw, only brand new can do 206 kw, for a 10 yrs r34, any where between 130 - 150 kw is normal. then During the tuning, he tested 0.6 bar first, was ok. then he tried 0.8 bar twice, failed twice, the power or boost was like goes up then drop down. what he explained to me was the stock computer will cut the fuel off if over boosted and strongly suggested me to buy a power fc. At the end of day. the guy setted 0.6 as low boost, and 0.7 or 0.65 as high boost...

we all know 1 bar =14psi, so 0.6 = 8.4 and 0.8 = 11.2

my questions are

1. is 139.5kw sounds normal with above mods?? i searched Autospeed website, says there stock R34 can do around 140-150kw, then plus exhuast and filter can do 160-170, and 180-200 with power fc on top of all these. 139.5kw is just fxxk sad and much less, though i heard every dyno machine is different, differnt dyno machine can give you different KW.

2. anything wrong with the tuning?? stock computer should allow u to boost to a safe level without fuel cut, i searched formum, most of you can boost to 11 or 12 psi with same mods as i have.

dont know what happened to my car, really sad now, please help, thx for reading this, ai~~~~~~~ paid $18000 for a piece of shit

So how the f**k did my completely stock r33 gtst s2 dyno 157kw atw. Took it to another dyno and it produced 155. i thought r34 produced more than 33's??

So how the f**k did my completely stock r33 gtst s2 dyno 157kw atw. Took it to another dyno and it produced 155. i thought r34 produced more than 33's??

numerous things

different settings

different dyno

different ramp rate

different air temp

and so on

~10rwkw is nothing to worry about

it is a reasonalbe assumption a bog stock r34 GTT would make more power than a bog stock R33

this assumes same dyno, same dyno, same operator, same settings, same environment

the ones you are comparing would not be the same, therefore whilst useful to compare in a ~ range, not a %100 comparison science

my questions are

1. is 139.5kw sounds normal with above mods?? i searched Autospeed website, says there stock R34 can do around 140-150kw, then plus exhuast and filter can do 160-170, and 180-200 with power fc on top of all these. 139.5kw is just fxxk sad and much less, though i heard every dyno machine is different, differnt dyno machine can give you different KW.

2. anything wrong with the tuning?? stock computer should allow u to boost to a safe level without fuel cut, i searched formum, most of you can boost to 11 or 12 psi with same mods as i have.

dont know what happened to my car, really sad now, please help, thx for reading this, ai~~~~~~~ paid $18000 for a piece of shit

The 206kw quoted by Nissan is not rwkw but flywheel kw. Your R34 is probably a little low and you are absolutely correct in that different dyno's produce different power figures. As an example I have Nismo FMIC, Nismo Injectors, Nismo fuel pump, Nismo reg, PFC, Z32 afm, hks 2535, Tomei cams, Apexi pod filter and full exhaust system from turbo back and produce 210 rwkw @ .6 bar on a Mainline dyno but 247 rwkw on a Dyno Dynamics dyno. It's all in how they set up the dyno. Like the other guys say, get a good FMIC and ecu and then you end up like the rest of us ..... just feeding the addiction!

cheers and enjoy the ride

Muz

Edited by Muz

Yeh i would say get yourself a Front mount its prolly running quite rich once you start winding the boost up the computer just dumps more fuel to keep things safe. Doing just that made over 25hp difference on my 33 and i was able to run a little bit more boost it ended up running 178kw at the rear wheels on 10psi.

I have a 34 now running 8.5psi with a FMIC full exhaust Apexi pod filter flowed turbo and the same Greddy boost controller at the moment its running 173kw at the rear wheels but should be able to get much more just tunning the boost controller once i work out how to set it right.

Out of interest what settings did he put on your boost controller to get the max boost your running?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...