Jump to content
SAU Community

Recommended Posts

I've just gone through a huge problem with back pain.

First felt it in Nov after playing golf and just thought I strained a muscle. 3 weeks later, the pain was still there so I saw my GP who said it would just go away with time. Bugger that, another 2 weeks later I spoke to a family friend who is an orthopaedic surgeon and sent me for a MRI. Turned out I had a herniated disc between my L5/S1 which pinched on my sciatic nerve causing a numbing pain down my left leg. He put me on Mobic (anti inflammatory), Valium and Endone. Also sent me to a physio who I did about 6 sessions with but that didn't work so I then got sent to a neurosurgeon to find out what I could do. He said to continue on the Mobic/Valium for another few weeks and see if the disc would slip back in. To no avail, I took the advice of MattLowth and visited a osteopath in Prahran who managed to manoeuvre the pain but couldn't make it go away.

I finally bit the bullet on Friday though and had an epidural nerve end blocking injection made up of cortisone. Was told it'll take up to 48 hours for me to feel a real difference so I'm still kind of waiting. I do feel better so I hope in the end this works. According to stats, 75% of people get better, 25% feel no difference and <1% get worse. Apparently the epidural will last various periods of time depending on the person. Some last a couple months but others go 5 years without a problem. It was a hell of a lot less painful than I expected but I also expected the "high" to be better which I was a bit disappointed with.

If you've tried nearly everything for a herniated disc, do the epidural. It should help and if that fails, unfortunately, the microdiscectomy will be the last resort which I hope I get to avoid.

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

has anyone who has been advised to "strengthen" their back, actually done any proper lifting?

a friend of mine has a "bulging" disc... not sure if that's the same as what's been mentioned already... going to get her to try and strengthen it properly

anyways, if you've been told to "strengthen" your back then i suggest just doing it properly and cease the donations to your physio.

Markos @ PTC Frankston – 0404 453 542

[email protected]

for the ns.com people, i'm sure they know him - m&m username. Use to post a bit on SAU as well.

Im telling ya, the only way to strengthen ya back is to get out the big guns! Some high tensile bolts, somthing to fuse bone...and a bottle of Johnny before i throw you on the kitchen table for the op. Never have to worry about back pain again

gallery_462_50_12636.jpg

You can hit me with a car man and i am good :D Just dont believe anyone that tells you chicks dig scars :devil:

Go and see your GP and ask for a CT scan to be done, it will show you if there is a problem. Then get a referrel to one of the Surgeons mentioned near the top of the thread. A disc prolapse or Bulge is the same thing.

Leewah - I had the same probs, but L4-L5 and L5-S1, pushing on the sciatic nerve, pins and needles in my toes from it and numbness, the micro discectomy worked for me but I had also been through an 8 week rehab program before, i.e strengthening and learning how to manage pain and lift properly.

I have since done more work on strengthening but still get occasional back pain. I have also had the supplements, Vitamin C is one of the best for disc regeneration, also had glucosamine. Tramadol will F you up if you take it for too long, Valium doesn't work after a while, Voltaren is good but can give you ulcers. I am now on no pain killers but do take the occasional Voltaren. My injury was in 2004 and I was 24 when I did it.

Im telling ya, the only way to strengthen ya back is to get out the big guns! Some high tensile bolts, somthing to fuse bone...and a bottle of Johnny before i throw you on the kitchen table for the op. Never have to worry about back pain again

Lol, or you could start deadlifting, once you reach 200kg you should be right for lower back strength :blink:

Good luck with it, I've had to go through something chronic as well over the past 14months and the medical bills kill you, most of it is medicare covered but out of pocket is adding up, make sure your level of private health cover is appropriate, and be warned that different health insurance companies pay very different amounts on the same claims.

  • 3 weeks later...

Quick update for everyone. I just came out of the Epworth today after having a L5/S1 microdiscectomy. I tried the epidural back in Feb but it didn't fix the problem so I bit the bullet yesterday and was discharged today. All done within 24 hours and I feel 100% better. I'm currently on Endone to control the pain and have been told it will be a 4-6 week recovery time if I do the correct exercises and look after myself so I hope this is the last time I have to worry about my back. Biggest problem for me now is that I'm not allowed to sit down for more than 20 mins at any time. I'm allowed to be lying flat or standing/walking but sitting really isn't an option for long periods of time because of the spinal compression which occurs when you sit.

My suggestion to everyone though would be to exhaust all your resources before taking surgery though as even though surgery has a 80% success rate, I still really think it is a last resort.

Quick update for everyone. I just came out of the Epworth today after having a L5/S1 microdiscectomy. I tried the epidural back in Feb but it didn't fix the problem so I bit the bullet yesterday and was discharged today. All done within 24 hours and I feel 100% better. I'm currently on Endone to control the pain and have been told it will be a 4-6 week recovery time if I do the correct exercises and look after myself so I hope this is the last time I have to worry about my back. Biggest problem for me now is that I'm not allowed to sit down for more than 20 mins at any time. I'm allowed to be lying flat or standing/walking but sitting really isn't an option for long periods of time because of the spinal compression which occurs when you sit.

My suggestion to everyone though would be to exhaust all your resources before taking surgery though as even though surgery has a 80% success rate, I still really think it is a last resort.

Hope you have a speedy recovery!

markos knows his shit, might be worth lookking at furthur down the recover path... he posts on here as pepe-lopez or something...

Bit OT: how fkn good is endone with valium :D some how made the combination after accidentally taking a few extra endone(fractured wrist, was so bad i had forgotten i had had any), ended up quite trashed hehe

has anyone who has been advised to "strengthen" their back, actually done any proper lifting?

Yes.

I used to move piano's and damaged 2 discs on one particular lift.

Saw my Physio (Clinton @ Langwarrin Sports Medicine)

Rehabbed (my routine) & got a different job.

Last year I blew a disc on preacher curl

Saw physio again, had a lot of manipulation & some dry needling.

Again rehabbed with my own weight routine.

All good... as long as I keep lifting weights.

I find that if I do not lift a weight for 2weeks, my back starts "tweaking" every now and then.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
×
×
  • Create New...