Jump to content
SAU Community

Recommended Posts

will be getting the ol' 26 forged soon,

have -5's, and the usual supporting bits and pieces,

was thinking about going towards an RB30?

whats the general consensus?

so have u come a verdict as yet...is it going to be an rb26 or rb30 for donkeypunch?

i've always wanted to try a donkeypunch just never had the opportunity ;)

  • Replies 285
  • Created
  • Last Reply

Top Posters In This Topic

so have u come a verdict as yet...is it going to be an rb26 or rb30 for donkeypunch?

i've always wanted to try a donkeypunch just never had the opportunity :banana:

ha yeah the ol' donkey punch, not for the faint hearted aye :D

i think (when i rob the local bank :banana: ) will go 26, want the car to remain standard(ish)...... ive got no gauges, not lowered, no aftermarket spoilers, the car has LMGT4's and looks like it came out of the factory. i was even gutted when my mechanic said i needed a FMIC and an aftermarket BOV.

i kinda like the idea that one day my car might be a classic, alot of my friends have modifyed their cars so much that it would take the purchase price of the car to get them back to standard. hey my car would look better lowered, but compared with my mates supra with his entire aftermarket spoiler kit cracking and falling of because its so low and the adjustables are so hard its like hitting the car with a slege hammer everytime he hits a bump, ill think ill stick wih the dirty ol' engine she was made to run with and hopefully may hold its value a bit.

but hey it sounds like the 30 is the way to go for power/torque, and well, everything else!

ha yeah the ol' donkey punch, not for the faint hearted aye :D

i think (when i rob the local bank :banana: ) will go 26, want the car to remain standard(ish)...... ive got no gauges, not lowered, no aftermarket spoilers, the car has LMGT4's and looks like it came out of the factory. i was even gutted when my mechanic said i needed a FMIC and an aftermarket BOV.

i kinda like the idea that one day my car might be a classic, alot of my friends have modifyed their cars so much that it would take the purchase price of the car to get them back to standard. hey my car would look better lowered, but compared with my mates supra with his entire aftermarket spoiler kit cracking and falling of because its so low and the adjustables are so hard its like hitting the car with a slege hammer everytime he hits a bump, ill think ill stick wih the dirty ol' engine she was made to run with and hopefully may hold its value a bit.

but hey it sounds like the 30 is the way to go for power/torque, and well, everything else!

as of today, ive taken the plunge & picked up my block, pistons, rods etc for my rb30dett build (after 4months of decision making on which way to go)

i just cant go past the results RIPS have attained with their rb30's over the years - i always want more power :banana:

besides, if keir wilsons well respected gtr is good enough for an rb30 then so is my gtr

as of today, ive taken the plunge & picked up my block, pistons, rods etc for my rb30dett build (after 4months of decision making on which way to go)

i just cant go past the results RIPS have attained with their rb30's over the years - i always want more power :D

besides, if keir wilsons well respected gtr is good enough for an rb30 then so is my gtr

keir wisons cars run the ol OS GIKEN RB30.. Its a bit different to the rb30 found in the vl/r31.. Plus they're 20k for a bottom end, makes r.i.p.s prices look like a steal!

as of today, ive taken the plunge & picked up my block, pistons, rods etc for my rb30dett build (after 4months of decision making on which way to go)

i just cant go past the results RIPS have attained with their rb30's over the years - i always want more power :(

besides, if keir wilsons well respected gtr is good enough for an rb30 then so is my gtr

I think you made the right choice :(

hahaha yeah i run the 2.. cant go past them. no surge at all. evan 1 worked better than 2 hks ssq ones..

sweet, so you think def go back to 2 standard BOV'S? i think i have 1 HKS plumback, bin it?

  • 2 weeks later...
RB30 gives RB26 a 4 second head start and goes for it for under half of the dragstrip and the RB26 won = RB30 gave RB26 a little too much of a headstart?

you snooze you loose!

RB26 cuts a 0.05 light...RB30 cuts a 1.02 light...race is won at the tree.

RB26 wins by an 8th of a mile. :sweat:

NOTE: the RB26 was street driven to the race meeting.

Edited by DiRTgarage
RB26 vs RB30

you snooze you loose!

RB26 cuts a 0.05 light...RB30 cuts a 1.02 light...race is won at the tree.

RB26 wins by an 8th of a mile. :sweat:

NOTE: the RB26 was street driven to the race meeting.

RB30;

NOTE: this rb30 is street driven .............aswel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...