Jump to content
SAU Community

Recommended Posts

How come noone seems to rate the Greddy EMU as an alternative to the PFC? I know it is still a Piggy Back Computer but I have had one for around 12 months and am really happy with it (Bought it back when PFC's were very scarce and VERY expensive!)and last time I checked which was a while ago they were a little cheaper than a PFC

Is there something I dont know about the EMU??

Had it installed by Jim at CRD and he seems to rate them just as high as a PFC

Sorry for the thread jump

it depends on your aims.... i have a power fc in my street car (300rwkw) and couldn't do without it...

i'm building up a ke70 drift pig with an SR20 and will probably just go with a safc for $$$ sake... the car is getting stripped and should weigh 900kgs give or take so i dont need massive power... 180rwkw (using my old 33 turbo) or so is the same power to weight as around 270rwkw in a full weight 33gtst.

the ke70 will be a rough car though... and if i get real shitty with the lack of timing i might buy a 2nd hand SITC in the future...

just to show an example of how its not always needed...

The money you spend on a SAFC you could get a toshi/doctor drift remap of your std ecu and do so much more with it, its not a pfc, but its way better than a SAFC.

So bang for bucks as a first step is rechip imo.

read this and other threads like it:

http://www.skylinesaustralia.com/forums/Ec...l&hl=doctor

This is what i wanted to do. But i would much prefer a Toshi remap with the road tune he does. I was a bit wary of just telling him my mods list and getting a re-map. He was asking for the temps i get over in NZ etc. He even said it would need to be dyno'd and touched up as required anyway. So theres more cost for that option :stupid:

If he flew over however.. :)

I would lean towards a full ecu if possible.

Im in a similar boat. My turbo is on its way out and have eyed up a larger turbo which ill be getting very soon. I bought a BRAND new SAFC Neo for peanuts(mates rates). However im contemplating whether to have it tuned or sell it, put the money aside, save up for a Link G4 and get it tuned once and for all.

Like everyone said tho, if you have a stock turbo you could do with a safc, however, when you do get 200rwkw, i bet you my bottom dollar that you WILL want more, and then you will realise "Doh, iv hit a brick wall". I know its hard, but you will end up saving money in the long run.

Just my 2c.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...