Jump to content
SAU Community

Recommended Posts

yeah. last thing you need is a bloke 100000kms away slaging your shit after hes paid good money and the f**ker locks up when its all tensioned down..

shane.. so your countersunk holes are oval? what about when its tightened? wont it centre itself being a taper?

That and relying on someone else to line bore it properly are my my greatest concerns lol

i dont actually use tapered bolts, i use a proper cap headed bolt. And for the 5 8mm bolts on the diff side that u need to tap the block for, i use a special half headed bolt so it leaves enough meat in the plate when its countersunk.

I decided not to use a tapered head bolt as a normal square headed bolt has a greater and more even surface to clamp down with.

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

Sorry Shane, I'm really not trying to rain on your parade but your going through the exact same issues I had to sort out years ago.

Are you using countersunk capscrews to hold the outer perimeter of the cradle to the rails?

Best thing you can do is build a motor with your design, address each and every problem as you get to them (there are still many more to come, trust me), run the motor at at least 1300-1400hp/10,000rpm to test it all, after 12 months or so and possibly several revisions/changes, you may have it sorted out and to a point you'll be able to sell them to the type of customer who can justify going to a full billet cradle in the first place.

Unless its proven in very high hp, high rpm motors your very target market possibly won't want to use it.

Many times over the years, I've been told my ideas won't work or arn't right but I never gave up and I tested everything myself so it was only my money I wasted if it all turned to shyte so keep going and best of luck to you with this and any other of your ideas,

Rob

Sorry Shane, I'm really not trying to rain on your parade but your going through the exact same issues I had to sort out years ago.

Are you using countersunk capscrews to hold the outer perimeter of the cradle to the rails?

Best thing you can do is build a motor with your design, address each and every problem as you get to them (there are still many more to come, trust me), run the motor at at least 1300-1400hp/10,000rpm to test it all, after 12 months or so and possibly several revisions/changes, you may have it sorted out and to a point you'll be able to sell them to the type of customer who can justify going to a full billet cradle in the first place.

Unless its proven in very high hp, high rpm motors your very target market possibly won't want to use it.

Many times over the years, I've been told my ideas won't work or arn't right but I never gave up and I tested everything myself so it was only my money I wasted if it all turned to shyte so keep going and best of luck to you with this and any other of your ideas,

Rob

Dont worry rob i really do appreciate your pointers as you have been building these things for years and have great results, clearly shows ur a wealth of knowledge.

U prolly didnt see my post just before, but im using a convential cap head bolt, not a tapered bolt. I can see the issues ud have if u used a tapered head bolt though.

Yeh i was going to wait and test it on my own car but its getting some chassis work done atm so it wont be ready to use for sometime, also i'm working with a workshop who have cars available to test on and if testing goes to plan a drag car to test on half way through the year.

I do see issues already like how are we going to overcome differences in thermal expansion (most likely by running non-std clearances), line boring with the 2 different metals and many more, but like u said thats what the testing is there for!

Thanks for the help so far, i really do appreciate it :P

  • 2 months later...

Hi all,

I've had quite a few people after kits. We're currently out of stock until at least the first week of June.

smorcr, I doubt anyone will give you the cad files to have one cut. Being in NZ, why don't you get one from RIPS?

Hi all,

I've had quite a few people after kits. We're currently out of stock until at least the first week of June.

smorcr, I doubt anyone will give you the cad files to have one cut. Being in NZ, why don't you get one from RIPS?

good luck with that 1 hey greg

:P

Hi all,

I've had quite a few people after kits. We're currently out of stock until at least the first week of June.

smorcr, I doubt anyone will give you the cad files to have one cut. Being in NZ, why don't you get one from RIPS?

I should have posted this 2 weeks ago. A couple of minutes after typing the post above, 16 plates arrived from the laser cutter. They will be machined Monday and back in stock. I'll take some video of the CNC process, it's pretty cool to watch if anyone is interested.

HEY rob in in auckland and would like to know more about your kits can you email me a price and what comes in this kit plz send pics to and if theres more than 1 opp then show me my opps and prices EMAIL me [email protected]

Most of the info you're after is on his website, proengines.com.au - have a look and email him.

I've just used a pro-engines plate, the quality is excellent.

with a bit of work the guys at hills motorsports have retained the internal oil pump pickup too.

Good to hear Duncan, was Mark happy with it?

  • 7 months later...

Sorry for digging up an old thread!

I have a Trust Sump extension and was wondering are the proengines/shane/rips etc internal pickups made for the stock sump?

or are they custom made each order to suit?

I know a GTR in UK has modified a proengines pickup with the Trust pickup however i was wondering is there a bolt on option

We can supply them with a semi finished pickup that needs to be cut to length to suit the depth of the sump. It's a fairly simple job but you need someone who can tig weld to weld it together once you have the length right.

  • 2 weeks later...
Good to hear Duncan, was Mark happy with it?

yep, mostly because it was complete and spot on :thumbsup: there might be cheaper options for basic cost, but this was a straight fit, no stuffing around option which is exactly what any workshop wants.

no point saving $100 and then having the workshop spend 4-8 hours modifying things to fit at $80-100/hr

We ended up using the standard pickup so it is about 1cm higher than normal - as a result I run a little more oil. We could have extended it as suggested but this is just a roady and it wasn't worth the trouble.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...