Jump to content
SAU Community

Recommended Posts

Hi All,

Ive had this anoying sqeak for the past week or so only notice it when im going slow and theirs minimal road noise (under say 40km/h). Tonight decided to investigate it a bit more. Ive worked out that when I push down on the Passenger front guard to compress/move suspension it makes the sound.

I removed the wheel and sprayed some inox on the any moving parts i could see to see if somethings just super dry or whatever and then put the wheel back on and had another push and the f**kers still their. :blink:

If i was to remove the coilover and completely remove all the suspension components lube them up and re install will I loose any camber or toe/alignment settings?

Any ideas?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/259313-anoying-sqeak-from-front-left/
Share on other sites

i had the same thing. and i know the frustration in trying to find it. but i ended up finding it.

pull the wheel off and undo the bolt at the front of the upper control arm. the is a bush in there with a spring assisted lip seal on it. get some lubex or inox or similar and spary it inside that bush. i poped the spring off and gently lifted the seal up with a small flatblade screwdriver and spayed a heap of Lubex in there.

when you are putting it all back together, put the bolt back in and just nip it up. then lower the car first before doing it up tight.

Yep, QWK32 has it right: I had exactly the same issue from both sides at the front: lubed up all the bushes and it was fine... I'd give that a shot first, and chances are it'll fix the issue.

what am i being carefull for when it springs up will it bash the guard? or just keep my hands clear?

If its just to avoid hand injury ill get cheffstagea over here to do it and not tell him... ive bled many times due to his cars :@!

what am i being carefull for when it springs up will it bash the guard? or just keep my hands clear?

If its just to avoid hand injury ill get cheffstagea over here to do it and not tell him... ive bled many times due to his cars :@!

yeppp cheeerssss

Bang on the money here guys!

Jacked the front on stands. off with the wheel.

Took the bolt out and removed the spings from each seal and pried the seals off. Sprayed some inox inside and then pulled the inserts out of the bush and greased the life out of everyhting. Put it back together and put wheel on dropped car down and snugged the bolt up.

Queit as a mouse =)

Thanks a heap josh!

  • 3 weeks later...

You could just use the whiteline adjustable ones, I've got them in but I'm starting to get the noise on the RHS. I just had a wheel alignment so I'm not going to bother stuffing up my front camber settings just to get rid of a slight squeak.

  • 4 months later...

Just tried to get the MF out. No can do with 17mm ring an two foot lever. Need to get my rattler back.

Incidently when I wanted to search for this thread I typed in "squeak' and got no response. The original post was "sqeak".

Typed that and bingo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...