Jump to content
SAU Community

Recommended Posts

the coin needed to get the RB20 head to slow that of a RB25 (is you stroke to 2.4) doesn't justify the cost IMO.

But ye, 26/20... lol

Do any of the mods we do justify the cost?

Not really.

If you wanna build a tough 20, then you're going to build one. And you wouldn't bother putting a 26 head on top...way too much work reducing the combustion chambers. The only downside to a 20 in the cylinder head department is the valve sizes. Fix that and put decent cams in and away you go. 20's are stronger, rev higher more safely etc, etc.

It's like the CA18, everyone says they are a piece of shit 'go for the SR', but they are wrong. A fresh CA will outdo a fresh SR with similar dollars spent

Here was me initially thinking this was a topical pisstake thread relating to the RB26 vs 30 one hahaha.

Seeing as there was a question asked about trying to make an RB20 breathe I may as well try an answer - doesn't one of the R34 offerings have a Neo RB20 head? Are they any better than the R32 one? Maybe that could be something worth looking at?

Heres a picture of the intake port job we did on my rb20head to flow for the rb24 build

post-23119-1236223233_thumb.jpg

I can't get one of the exhaust because the manifold is urrently attached too it.

so why did you open up the port entry to slow down the air? did you touch anywhere near the valve seat?

so why did you open up the port entry to slow down the air? did you touch anywhere near the valve seat?

Of course... rite down to the valve seat. intake is port matched also.. no problems with air speed at 30psi :banana:

Toque x Revs = horsepower.

So, RB20 doesn't have mcuh torque, so rev the poor little thing as hard as you dare!

In order to rev really stinking hard, it will really want to breathe..

This thread doesn't seem that silly when you boil it down. Sure, there may be a better way of getting the airflow your after, but I cant see the issue with starting with a head that already is known for lots of air and has a massive amount of parts you can buy off the shelf to help you.

Issues doing any kind of build will always bugg you,

but i bet everybodies jaw would hit the floor if they got past by an RB20 revvvvving @11 000rpm.. or higher! The sound would be like an R1 on roids.

Say good bye to any spare time and all your cash! but you sure have proved one thing, nobody is going to beat you to it!

I say Go for it..

How are you going to address the fact that the bore sizes are seriously huge mismatches? 78mm bore into a chamber designed for something with a 86mm bore? Its not going to be nice in there at all.

How are you going to address the fact that the bore sizes are seriously huge mismatches? 78mm bore into a chamber designed for something with a 86mm bore? Its not going to be nice in there at all.

+20

It's not a stupid idea but it's stupid if you try it. People are always trying to re-invent the wheel. You don't need a 26 head on a 20 block to make power. Just because it's a 26 head doesn't mean you are automatically going to be able to rev it to 11k and make 1000hp. Thats a crock of shit. And as far as revving an engine to 11k, It's not just the cylinder head that limits rpm. Crankshaft, rod length, stroke etc all play a role. With a cast crank you are not going to safely rev a 20 past 9500rpm.

It's like putting a 20 head onto a 30 block. Stupid. Increasing compression ratio in a forced inducted engine is as simple as increasing boost. Plus chamber sizes are far too different to make it work. Going that way is more practical than 26 head on 20 block though. The valves will hit the edges of the block on the way down and you won't get the head gasket to seal.

But if you have unlimited funds and want to make something that no one else has, then go for it. You will have an engine that people will say 'wow, that's impressive' but then will wonder why their mum's corolla can nearly keep up with it.

TUF120

http://www.boostcruising.com/forums/index....=317565&hl=

AFAIK was running a 26 head on his 20...

He is on this site but cant remember his user id?

edit here he is! http://www.skylinesaustralia.com/forums/RB120WHY-m24062.html

Edited by dano4127

I have a 26 bottom end and head. What would b easiest is that i throw the RB20 crank in the 26 block with 26 head. Running the 86mm bore will give me a bit more diplacement but also increased weight of the pistons. But the shorter throw crank would make the thing a crazy rev happy engine. Dont understand why you would do it though, other then for shits and giggles or a class of motorsport that dictates your cc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...