Jump to content
SAU Community

Rb26 Engine Removal

DamageInc

By DamageInc,
in South Australia

 Share

Recommended Posts

DamageInc Grand Master

DamageInc

Posted
Posted

As you might know , my rb26 has spun a bearing.

i have replacement parts to fix it but my only problem is getting the engine out of the car and doing it myself.

seeing as im really low on cash i was wondering if anyone could lend a helping hand to help me rebuild the motor.

ill happily pay you for your services etc but my main priority is getting my car back on the road as i dont have a daily.

any help will be greatly appreciated !

Link to comment
https://www.sau.com.au/forums/topic/260299-rb26-engine-removal/
Share on other sites
YLD-CHLD Collaborator

YLD-CHLD

Posted
Posted
As you might know , my rb26 has spun a bearing.

i have replacement parts to fix it but my only problem is getting the engine out of the car and doing it myself.

seeing as im really low on cash i was wondering if anyone could lend a helping hand to help me rebuild the motor.

ill happily pay you for your services etc but my main priority is getting my car back on the road as i dont have a daily.

any help will be greatly appreciated !

pity u so far away,otherwise be more than willig 2 lend a hand. :D

DamageInc Grand Master

DamageInc

Posted
  • Author
Posted
still need the engine crane? what sort of help do you need?

yeah mate ill need the engine crane closer to the weekend as i think ive got a mate to help me out.

need to pull the engine out and replace bearings and oil pump , possibly will be replacing crank , rods & pistons .

D_Stirls Veteran

D_Stirls

Posted
Posted
yeah mate ill need the engine crane closer to the weekend as i think ive got a mate to help me out.

need to pull the engine out and replace bearings and oil pump , possibly will be replacing crank , rods & pistons .

Don't forget you will need to get the assembly balanced as well. I'd also just the bore a light hone.

DamageInc Grand Master

DamageInc

Posted
  • Author
Posted
Don't forget you will need to get the assembly balanced as well. I'd also just the bore a light hone.

FOOLBOOST & Myself are pulling the engine out and pulling it apart and getting everything that is going in the motor put in professionally :)

Blue32 Experienced

Blue32

Posted
Posted

Depending on the severity of the mechanical dis-symphony - you'll have bearing material through your turbo bearings too. Make sure you fully clean out your oil coolers etc of any bearing material - it gets everywhere, trust me been there got the t-shirt.

DamageInc Grand Master

DamageInc

Posted
  • Author
Posted
Listen to Andrew, take his word as gospel. He knows his shit.

P.S. Cheers again Andrew for all your help :(

yes i know this

just my car is a pain in the arse and is a big regret to me :D

want it fixed so i can enjoy it again :)

SLAPS Rising Star

SLAPS

Posted
Posted (edited)

Turbo's will be fine providing you didn't drive it too much once she started knocking.

You will have to replace the oil pump though.

Cheap RB30E bottom end, shove a washer from the rb26 oil pump in to the rb30's std pump to bump up the pressure a little, block the rear oil restricter, 2 low tensioners suitable cam belt, cheap headgasket and it will be fine while you spend some time getting the rb26 built back up. :)

+ you'll get to experience a little rb30 wrath. :(

FOOOOLBOOST has done rb30 stuff before so he will probably make the same recommendation. :cheers:

Edited by TheRogue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...