Jump to content
SAU Community

Recommended Posts

In regard to brake fluid, look at RBF600 from bike shops or similar, its DOT 4 and not compatible with all other DOT 4's so flush it out completely when you put it in :blink:

But its not DOT 5 so I recommend it as it has less chance of getting moisture in it and it doesn't contain the same chemicals that DOT 5 does.

The 1 litre oil overfill is not required, but some people do it....

The fire extinguisher, my one is in the rear, its a stretch but if I did flip the car and there was smoke coming out, the fire extinguisher wouldn't be the first thing on my mind anyway, and I never plan on doing that :blink:

I'd more likely expect my engine bay to catch on fire or something.

If it goes in the front that is the better way to do it but I wanted to avoid drilling any new holes in the car, so its upto the individual :)

thank you "some_cs_student" for your input.

As far as brake fluid goes im running castrol SRF, the car has a Trust sump extension for some extra oil, but might just put a little more in for safety, and sort of agree about the car being on its roof thing, not quiet sure if the Fire extinguisher is gonna be the first thing i reach for. im more concerned will it pass scrutineering?

cheers

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

good luck taking off your seatbelt (which will either be stuck from the load or falling onto your head) or opening the door.

Only thing you could do in this situation is wait for rescue to show up and have easy access to the fire extinguisher.

As i explained above, its a 5minute job to mount fire extinguisher under the driver seat which is a much safer option.

I was upsidedown in my old car a few years back. The hole things abit disorientating.. I remember being upright, then it was like i woke up or something and i was upsidedown. I had the fire extinguisher in the back, just behind the front passenger seat. I didnt actualy think to get it :blink: but there was no chance in hell i would of been able to anyways.

I was pretty calm but so disorientated I had trouble finding the door thingy or window switch.....

I rekon the fire extinguisher should go in the front. Maybe even on the console thingy just behind the handbreak. That way you can grab it an be on your merry way.

good luck taking off your seatbelt (which will either be stuck from the load or falling onto your head) or opening the door.

Only thing you could do in this situation is wait for rescue to show up and have easy access to the fire extinguisher.

As i explained above, its a 5minute job to mount fire extinguisher under the driver seat which is a much safer option.

ok well maybe a lil better explanation would be appreciated, on the passenger side in front of the seat is great but the transmission tunnel seems to interfere with the way your steal bracket is mounting. could you possibly post a couple more pics of the actual assembly in the car with out the actual extinguisher? thank you

yip thats what hapepned to me. I didnt want to take off my seatbelt because it was the only thing holding me from falling on my head hehe. Was heaps of glass everywhere so didnt want to use my hands that much on the carpet..

good luck taking off your seatbelt (which will either be stuck from the load or falling onto your head) or opening the door.

Only thing you could do in this situation is wait for rescue to show up and have easy access to the fire extinguisher.

As i explained above, its a 5minute job to mount fire extinguisher under the driver seat which is a much safer option.

I was upsidedown in my old car a few years back. The hole things abit disorientating.. I remember being upright, then it was like i woke up or something and i was upsidedown. I had the fire extinguisher in the back, just behind the front passenger seat. I didnt actualy think to get it :blink: but there was no chance in hell i would of been able to anyways.

I was pretty calm but so disorientated I had trouble finding the door thingy or window switch.....

I rekon the fire extinguisher should go in the front. Maybe even on the console thingy just behind the handbreak. That way you can grab it an be on your merry way.

thanks justin :blink::(:) would you mind explaining how you ended up upside down and at what track?? (not sure if this is encouraging once again :) )

ya i was actualy gonna post up a few days ago hehe

I was at one of the phillip island track days and it was the last session of the day. And I was just chugging along on the warm up lap doing like 80-100km, I think maybe i was concerned with the car behind me for a second to long..

and then all of a sudden the car was heading off the track and into a metal fence, once it hit the grass ther was no stopping her. Anywho next to the fence there was like some little ditch/hill type thing and the and the car kinda went up that and rammed ito the start of the metal fence and flipped over sideways seems it wasnt balanced i guess. I was fine, just had a scratch on my arm. Ambulance ppl wanted me to goto hospital just incase, but sif goto some country hospital and get molested.

If if i was tall (im like 5'7) i would of had quite a few issues though... and if i had a passenger they would of been.. probs not with us anymore..

Saying all that though, 99% of the ppl on these forums goto track days heaps and havnt had any major problems :blink: You just need to be prepaired incase something does cause ya, it was an expensive weekend for me.. I didnt even bother asking shannons if i was covered :blink:

Track days are great fun, but can be very expensive.

My nemesis is Calder Park Rwy. I use to work there, so i have been around the track a few times, but every time i did a proper track day it has cost me at least $7K :blink:

1/ Damp cold track, last session of the day/night, after turn one applied too much power too early, rear tyres hit the mud and all i could do was watch the ass end come round and hit the concrete barrier.

2/ Last session of the day (again), blew the engine; cracked the piston ring-lands in cylinder 3

The only reason these repairs have exceeded $7k is because i didn't just repair the damage, but used the damage to justify substantial upgrades :blink:

Racing is expensive on normal days; tyres, brakes, fluids, wear & tear, etc. Add the misfortune of something critical going wrong, a fun day could go bad very quickly. All i say is if you love your car and really are keen to do track days, make sure you have some disposable savings, just in case of the worse scenario situation occurs.

heheh you don't wanna hear what track he flipped it at..

haha thanks dezz, your reading my mind haha.

hehe i believe sau stopped doing driving training at philip island cause of my incident :blink: ???

i didnt go with sau though, went with MCCR club, ferni(satan) and a few others

wow ok well at least your ok i guess, weird that it was just for a second and "bang" all over. happens that quick hey. well hope your car and wallet have recovered from the event.

yeah it wasnt to bad in the end. I sold like ALL the parts for a bit. Got a GTR month later :blink:

plus i won the sau 'buff right out award' in 2007, so everything kinda evened out in the end :blink:

oh yeah 2 other ppl crashed the same day as me, diff spots tho.. just putting it out there for ya...

wow ok well at least your ok i guess, weird that it was just for a second and "bang" all over. happens that quick hey. well hope your car and wallet have recovered from the event.
if your abit worried you should look at the driver dynamic track days at sandown. Shannons insurance and a few others will aparantly insure you if you crash seems its "training".

yeah thanks, i am actually gonna have an instructor or do a driver training day first up, deffinatley not going out on my own just yet. was that your first day? had you had any track driver training before?

i had gone to a couple of driver dynamics days at sandown and a sau day at calder (but got scared cause it was raining so retired early). Also went to DECA like 5 times

Im pretty cautious when im driving, like i dont try set any records.. I think I just forgot to concentrate for a sec :blink:

Edited by justin911
Shannons insurance and a few others will aparantly insure you if you crash seems its "training".
Not at the track training days :blink:

They have reworded their policy. Shannons will only cover you if the training days are done to create road situations and improve your street driving skills. If you are doing full laps of the track or drift training, they will not cover you.

yeah it wasnt to bad in the end. I sold like ALL the parts for a bit. Got a GTR month later :D

plus i won the sau 'buff right out award' in 2007, so everything kinda evened out in the end :D

oh yeah 2 other ppl crashed the same day as me, diff spots tho.. just putting it out there for ya...

And I won the 2008 award...Kinda funny too, same track, same corner :banana:

which corner was it? the fences are so far back at the island I'm impressed you both managed to hit them!

I've had a few big offs at Sandown but never hit anything... went straight on at turn 1 but pulled it up well before the fence

also went wide at the sweeper at the end of the back straight which was a bit worrying (turned in too late carrying too much speed), if you've been there you know there isn't much room... had to try and turn on the grass at about 150km/h which wasn't a great idea, made it back onto the black stuff though... with a few massive tank slappers trying to get the thing pointing straight again

always beware the last session of the day... the car is not the only thing you have to worry about getting tired!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...