Jump to content
SAU Community

Recommended Posts

I am wrecking a white R32 GTR.

Some parts I want to sell at the moment are:

- Front right guard, very straight, no bog. $200

- Front Bumper reo $50

- Rear bumper $50

- Fuel tank $80

- Side mirrors $50 each

- Doors TBA, with or without glass.

- Most interior parts TBA

- Boot without wing $150

I can email photos to those interested.

Link to comment
https://www.sau.com.au/forums/topic/260788-r32-gtr-wrecking-white/
Share on other sites

The parts are in Warragul VIC, but I can bring them to Ferntree Gully.

Unfortunately the person before me has cut speaker holes in the quarter trim, other than that they are good. I assume you are talking about the interior trim here. If you want them with the speaker holes in them you can have them for $20 each.

The gear knob is missing.

The parts are in Warragul VIC, but I can bring them to Ferntree Gully.

Unfortunately the person before me has cut speaker holes in the quarter trim, other than that they are good. I assume you are talking about the interior trim here. If you want them with the speaker holes in them you can have them for $20 each.

The gear knob is missing.

Sotty mate i mean the window surrounds

Usually they seperate from their backing over time. They go around the rear quarter windows.

Are they in good order? Pics please :P

Sotty mate i mean the window surrounds

Usually they seperate from their backing over time. They go around the rear quarter windows.

Are they in good order? Pics please :P

Sorry, I am using the rear quarter windows for my other car.

From what I have been told, the windows come complete with rubbers and surrounds as one moulding. So I getting novus to remove them complete and put them into my other car. I damaged my own pulling them out when I had a respray.

Sorry, I am using the rear quarter windows for my other car.

From what I have been told, the windows come complete with rubbers and surrounds as one moulding. So I getting novus to remove them complete and put them into my other car. I damaged my own pulling them out when I had a respray.

No worries :/

I need the 2 HICAS hard metal pipes that run from the front of the car to the rack at the back underneath. Theyre are about 10mm in diameter.

Please PM me with price and time, maybe sometime next week? Im in the east side as well so can pick up.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...