Jump to content
SAU Community

Recommended Posts

hey there'

so my car is going to try getting rid of shuffle (RB26, garrett -5's) going back to standard BOV, dirtgarage said that the HKS balance pipe did a good job, but cant be bought anymore, and expensive around 1k?

my mechanic suggested making one up??????

any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/
Share on other sites

try the stock bovs first i do not get any shuffle at all :P

yeah crap, i have read so much stuff about this, but my tuner insist on not going back to stock because of the leak?

i dont really want to 'tell' him to put them back on?

but i should really aye

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4473989
Share on other sites

they are ment to be good for like over 600kw are they not?

i only have 300kw atm on 15 close to 16psi but yeah no shuffle so far....

ill let you know how it goes once i rewire this fuel pump and add some more boost :P

what mods do you have?

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4474015
Share on other sites

they are ment to be good for like over 600kw are they not?

i only have 300kw atm on 15 close to 16psi but yeah no shuffle so far....

ill let you know how it goes once i rewire this fuel pump and add some more boost :/

what mods do you have?

hey, custom made dumps, custom made inlet (prob half the problem there!) injectors, pump, G4 link, profect b, etc etc running 18lbs 310 RWKW, stock internals, cranking boost to 20lbs soon.........

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4474157
Share on other sites

Stock GTR bov's leak?

Yes

@ Idle they open and this helps avoid the comp surge.

same as the stock rubber piping etc etc.

Nissan made the RB26 setup perfectly in that respect. You have issues only when you go hard pipe kits, take off the stock BOV setup etc etc.

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4474261
Share on other sites

I have -5s, HKS hard pipe kit + Drag Cooler, standard exhaust and inlet manifolds, 20psi, NO BOV, NO SHUFFLE.

Many people have recently had this problem, its related to the turbo intakes, BOVs, and a few other things I cant remember.

Id be looking at your inlet. Its the only thing different.

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475369
Share on other sites

I have -5s, HKS hard pipe kit + Drag Cooler, standard exhaust and inlet manifolds, 20psi, NO BOV, NO SHUFFLE.

Many people have recently had this problem, its related to the turbo intakes, BOVs, and a few other things I cant remember.

Id be looking at your inlet. Its the only thing different.

heres my inlet, it would be a pitty to scrap it.

any ideas ?

post-59994-1236922327_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475848
Share on other sites

i have stock intake with pods stock dumps stock bovs stock cooler and air flow meters

my guess would be its your bovs... are they adj?

maybe try differnt setting harder or softer?

yes they are adjustable, my mechanic said he would try a softer spring.......

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475857
Share on other sites

What R31 Nismoid and femno said :banana:

I have the same setup and no shuffle either.

As nice as it looks, I'd scrap it and go the standard bov's too.

dam i couldnt bring myself to scrap it, i didnt ask my mechanic to build it like that, but thats what he did, i dont want to through more money away too, might just get that BOV done, then live with the noise, just would like to here those ol' -5's spool up, rather then 'thomas the tank engine' on crack

cheers robbie

post-59994-1236923460_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475903
Share on other sites

i get the same issues with my setup to the cchh chh chhh

i have std rebuilt turbos w steel wheel on ss manifolds, full hard pipe kit and no bov and pfc with afm just shy of 300kw but i recon its the manifolds not being tuned lengths or the hard piping not being the same length from turbos to intercooler. what i was going to do is run a 2 into 1 intercooler and make the pipe lengths the same from the turbos to the intercooler?

what do you guys recon? and im not giving up the the hard piping kit lol

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475950
Share on other sites

nice intake mate!

leave it and try the stock bovs first

hey thanks for that,

yeah going to try a softer spring first on the HKS BOV, then will prob leave it at that, may go back to stock if i ever have anymore spare coin :)

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4477639
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...