Jump to content
SAU Community

Recommended Posts

hey there'

so my car is going to try getting rid of shuffle (RB26, garrett -5's) going back to standard BOV, dirtgarage said that the HKS balance pipe did a good job, but cant be bought anymore, and expensive around 1k?

my mechanic suggested making one up??????

any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/
Share on other sites

try the stock bovs first i do not get any shuffle at all :P

yeah crap, i have read so much stuff about this, but my tuner insist on not going back to stock because of the leak?

i dont really want to 'tell' him to put them back on?

but i should really aye

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4473989
Share on other sites

they are ment to be good for like over 600kw are they not?

i only have 300kw atm on 15 close to 16psi but yeah no shuffle so far....

ill let you know how it goes once i rewire this fuel pump and add some more boost :P

what mods do you have?

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4474015
Share on other sites

they are ment to be good for like over 600kw are they not?

i only have 300kw atm on 15 close to 16psi but yeah no shuffle so far....

ill let you know how it goes once i rewire this fuel pump and add some more boost :/

what mods do you have?

hey, custom made dumps, custom made inlet (prob half the problem there!) injectors, pump, G4 link, profect b, etc etc running 18lbs 310 RWKW, stock internals, cranking boost to 20lbs soon.........

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4474157
Share on other sites

Stock GTR bov's leak?

Yes

@ Idle they open and this helps avoid the comp surge.

same as the stock rubber piping etc etc.

Nissan made the RB26 setup perfectly in that respect. You have issues only when you go hard pipe kits, take off the stock BOV setup etc etc.

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4474261
Share on other sites

I have -5s, HKS hard pipe kit + Drag Cooler, standard exhaust and inlet manifolds, 20psi, NO BOV, NO SHUFFLE.

Many people have recently had this problem, its related to the turbo intakes, BOVs, and a few other things I cant remember.

Id be looking at your inlet. Its the only thing different.

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475369
Share on other sites

I have -5s, HKS hard pipe kit + Drag Cooler, standard exhaust and inlet manifolds, 20psi, NO BOV, NO SHUFFLE.

Many people have recently had this problem, its related to the turbo intakes, BOVs, and a few other things I cant remember.

Id be looking at your inlet. Its the only thing different.

heres my inlet, it would be a pitty to scrap it.

any ideas ?

post-59994-1236922327_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475848
Share on other sites

i have stock intake with pods stock dumps stock bovs stock cooler and air flow meters

my guess would be its your bovs... are they adj?

maybe try differnt setting harder or softer?

yes they are adjustable, my mechanic said he would try a softer spring.......

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475857
Share on other sites

What R31 Nismoid and femno said :banana:

I have the same setup and no shuffle either.

As nice as it looks, I'd scrap it and go the standard bov's too.

dam i couldnt bring myself to scrap it, i didnt ask my mechanic to build it like that, but thats what he did, i dont want to through more money away too, might just get that BOV done, then live with the noise, just would like to here those ol' -5's spool up, rather then 'thomas the tank engine' on crack

cheers robbie

post-59994-1236923460_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475903
Share on other sites

i get the same issues with my setup to the cchh chh chhh

i have std rebuilt turbos w steel wheel on ss manifolds, full hard pipe kit and no bov and pfc with afm just shy of 300kw but i recon its the manifolds not being tuned lengths or the hard piping not being the same length from turbos to intercooler. what i was going to do is run a 2 into 1 intercooler and make the pipe lengths the same from the turbos to the intercooler?

what do you guys recon? and im not giving up the the hard piping kit lol

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4475950
Share on other sites

nice intake mate!

leave it and try the stock bovs first

hey thanks for that,

yeah going to try a softer spring first on the HKS BOV, then will prob leave it at that, may go back to stock if i ever have anymore spare coin :)

Link to comment
https://www.sau.com.au/forums/topic/260820-26-5s/#findComment-4477639
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...