Jump to content
SAU Community

Decided To Go Big Hp

passin ewe
 Share

Recommended Posts

passin ewe Proficient

passin ewe

Posted
Posted

I've decide to go big HP, so out with the current and in with the new. I'm putting a RB 25det into my C210 coupe, so now I'm selling my L28. This was a crate motor from Nismo about 10 years ago. It was freshened about 20,000 ks ago and I have paper work .

From Nismo it came with:

The motor is N42 on N42

Bored to 3.0L

East bear triple weber inlet manifold ( japanese)

East bear tuned length extractors " " "

Triple 45 webers made in Italy ( matching set DCOE)

Motor is in great condition and has good performance.

If need be I can put you in touch with the original owner /importer.

It's a shame most of you on this site are out of W.A but anyone local and interested is welcome to test at your convenience. Looking for about $3200 post-44326-1237038807_thumb.jpgpost-44326-1237038761_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/261118-decided-to-go-big-hp/
Share on other sites
Factory 5 Mentor

Factory 5

Posted
Posted

you sure you want to go to a rb25???????

you can still get truckloads of power from a L28, seriously how much power are you after, and will you be able to use it too!

the L series is plenty capable of putting out 300rwkw and torque to match, plus its kinda retro and cool, as hardly anyone in oz does it!

but one factor does come into it, cost.

it is far cheaper to get the power etc out of a RB than an L series... i could get a 200kw 20det package for under 2 grand installed... but im not gunna as then there will be engineering bulshaet to sort out as im moving state like every few years

good luck with selling up, i know it would be sweet addition to anyones vehicle... maybe sign up to viczcar as they do a fair bit of stuff like that

passin ewe Proficient

passin ewe

Posted
  • Author
Posted

Mag86 I hear what your saying , but to get 300rwkw you'd be talking 3.1 stroker using the LD28 crank probably and they alone are fairly big bucks along with all the other performance parts for L series.I should have got in at the right time and bought up big from the states..I've thought about turbo L28 but again lots of changes to my motor ie: lowering compression, maybe change heads. I've seen some get up and go ones on YOU TUBE. What i do like about the RB 25 changeover is the power and driveability. I could drive this to work on a daily basis, meaning one less car to pay out for yearly. Bottom line is if I don't get an offer of at least $3000 I won't sell it. Instead I'll spend money and get the much needed LSD. I forgot to mention the motor will come with 2 x5 speed boxes. The one in the car and a spare.

Ghostrider Grand Master

Ghostrider

Posted
Posted

Mag86 I hear what your saying , but to get 300rwkw you'd be talking 3.1 stroker using the LD28 crank probably and they alone are fairly big bucks along with all the other performance parts for L series.I should have got in at the right time and bought up big from the states..I've thought about turbo L28 but again lots of changes to my motor ie: lowering compression, maybe change heads. I've seen some get up and go ones on YOU TUBE. What i do like about the RB 25 changeover is the power and driveability. I could drive this to work on a daily basis, meaning one less car to pay out for yearly. Bottom line is if I don't get an offer of at least $3000 I won't sell it. Instead I'll spend money and get the much needed LSD. I forgot to mention the motor will come with 2 x5 speed boxes. The one in the car and a spare.

Why are you guys all DREAMING?????

HP isn't the answer totally on it's own you know.

How would you like 380ft/lb of torque @ 4500 on less than 8.5psi of boost?????????

Cheers, D

noddle Rising Star

noddle

Posted
Posted (edited)
How would you like 380ft/lb of torque @ 4500 on less than 8.5psi of boost?????????

Cheers, D

I must say, turboing my N/A L24 has made a huge difference, it has a lot more torque, (above 1800 RPM)

it throws you back into the seats when you stick it into it,

the only down side is that, I need to be so much more careful in the wet, I can easily break tracking in 3rd, and that's a bit scary when you not expecting it (at 110Kmh)

Nigel

Edited by noddle
noddle Rising Star

noddle

Posted
Posted
sounds like fun!

I Had my son in with me, we were still tuning Megasquirt when this happened the first time, it gave me a big scare, I don't think my son was very impressed..

but I must say, I love the power now, comparing the power from the FI and turbo to my other 240K, it's a huge difference.

I now need to pull my finger out and build my L28 I have waiting.

Nigel

stagefumer11 Rising Star

stagefumer11

Posted
Posted
It's a N/A L28, but when I do it, It will be fitted with a turbo. I need to look into getting dished pistons for it

Nigel

Why do you want to dished pistons?. Flattops Have a better flame front.. Higher compression isnt a problem. Its all the the tune..

Btw, you dont need a 3.1L to make 300rwkw.. You can do 300rwkw on a Stock n42/n42 combo l28... You dont need the cubes for the power in the L Serries..

passin ewe Proficient

passin ewe

Posted
  • Author
Posted
Why do you want to dished pistons?. Flattops Have a better flame front.. Higher compression isnt a problem. Its all the the tune..

Btw, you dont need a 3.1L to make 300rwkw.. You can do 300rwkw on a Stock n42/n42 combo l28... You dont need the cubes for the power in the L Serries..

mmmm 300 rwkw you say out of an L28. Please exlpain, in detail as I'd like to know how without putting the LD28 in and so forth. Are we talking big PSI turbo or just a performance built carburettored L28. Would seriously like to knpw the formula for this kind of HP.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • V35_Paul
      Could it really happen......

      By V35_Paul · Posted

      Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...