Jump to content
SAU Community

Recommended Posts

Got my power fc tuned last night by Guiltoy,

Seems to run out of fuel at high rpm, he thinks its the fuel pump.

So question is, what fuel pump should i get for a mildly tuned 32 Gtr?

He recomended a Bosch 040, and i've seen Walbro 500hp in-tank pumps for $195 on sau.

Any experience or insight would be appreciated

-Michael-

Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/
Share on other sites

Bosch pumps are far superior to walbro.

Guilt-tripper told you Bosch, you trust him with your tune...so trust his advice on fuel pumps too.

The Bosch item is about $40 more...people who skimp on products are always the ones who scream the loudest when it goes 'pop'.

Its your fuel system...its keeping your engine alive...stick your hand in your pocket and put in a decent pump.

BTW...my 1000hp GTR uses an 040 as a lift pump.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489502
Share on other sites

Get a Bosch 044 and get it installed properly. Then it will be an intake pump :P And will run more HP than 040

if its a 300kw car an 040 would be better as all the 044 will do is cycle more fuel through the rail, unnecessarily heating the fuel and robbing the engine of horsepower.

Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489518
Share on other sites

You doing it youself or getting some one else to install it? If yourself, get a Nismo/Tomei one, piece of piss to install and no 1/4 tank bullshit surging. Trust me, when you have to install the 040 you will be kicking yourself for not spending the extra coin on the nismo/tomei one. They are annoying to install, helped to do one in my mates 15, never again.

Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489519
Share on other sites

You doing it youself or getting some one else to install it? If yourself, get a Nismo/Tomei one, piece of piss to install and no 1/4 tank bullshit surging. Trust me, when you have to install the 040 you will be kicking yourself for not spending the extra coin on the nismo/tomei one. They are annoying to install, helped to do one in my mates 15, never again.

slice of urine in a R32 GTR...15mins tops. If put in right (in the bucket with the proper mount and clip) it wont surge as the bucket is filled by the reg. return line.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489530
Share on other sites

Yeah but is that because you have done 14,000 of them? I'm sure if i did one again now, it would take me half the time. However if this is his first attempt (like mine was), im pretty sure there will be some swearing involved.

However maybe you are right and R32 GTR's are easy, never done one of them personally.

Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489546
Share on other sites

Had same probs with gtr making 340kw running a little close to the edge fuel, Installed a Bosch 023 intank (using the DIY thread on SAU) and added an adjustable regulator bumping the pressure up a bit from 30 to 45 PSI and it has solved the problems.

Pump-$170 new

Reg-$165 new

Clamp-$5 new

Edited by doubled
Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4491987
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mine is all -12, I’m running a dry sump in a billet block though 
    • HG's high flow is not "bolt on". The core is shorter, moves the comp cover rearwards in the engine bay. means you have to deal with the inlet plumbing a little bit. This is probably something to consider with every "bolt on" turbo anyway.
    • HyperGear. Just get a high flow of the stocker. Good, reliable, and should bolt on. Yes it will want things like a retune once done, so you need to factor this in to your spend too.
    • Hi. Iam looking for some "cheaper" bolt on turbo on RB25DET NEO. I do not want "big" power just better reliability than the stock turbo which is "fot now" good but is old and i do not think it has "easy" life. One the Skyline here running some "temu" china Turbo but i dont trust those... Thanks!  
    • Hi guys, Making some space/cleaning up. A whole heap of random OEM R33 GTR parts and other random bits and bobs. I will update this thread as I go. Parts are located in Moorebank NSW 2170. Pickup preferred but will post at buyers expense. Prices are negotiable. If they don’t sell it will go in the bin. Item 1: BOV return pipe. $40 Item 2: RB26 cam gears. $20 Item 3: R33 GTR torque split, oil temp, boost centre gauge. $100 Item 4: RB26 fuel rail x 2. $20 each Item 5: RB26 Recirc valves. $50 Item 6: OEM upper front arms. $20 Item 7: Royal Purple Max Gear 75w-140 1 quart/946 ml x 5. $50 each or 5 for $200. Item 8: OS Giken 80w-250 diff oil 1 litre. $25 Item 9 Eibach springs. ers-11-140-60-0140. $100 https://www.streetfx.com.au/eib140-60-0060-eibach-ers-140mm-length-x-60mm-id-coil-over-spring?_ga_campaignid=22235933977&_ga_adgroupid=180146800292&_ga_keyword=&_ga_device=m&_ga_target=pla-295238231169&_ga_locint=&_ga_locphy=9071723&_ga_matchtype=&_ga_network=g&_ga_device=m&_ga_placement=&_gcl_id=CjwKCAjwlt7GBhAvEiwAKal0cvkVE_hstv24cDiaICsIk1oznH9zAoJf3By6vR3Tpe7jmByqM6JFHBoCZYAQAvD_BwE&gad_source=1&gad_campaignid=22235933977&gbraid=0AAAAADPiTbo1xAuvnjIWWYnezivf-BUSY&gclid=CjwKCAjwlt7GBhAvEiwAKal0cvkVE_hstv24cDiaICsIk1oznH9zAoJf3By6vR3Tpe7jmByqM6JFHBoCZYAQAvD_BwE    
×
×
  • Create New...