Jump to content
SAU Community

Recommended Posts

Got my power fc tuned last night by Guiltoy,

Seems to run out of fuel at high rpm, he thinks its the fuel pump.

So question is, what fuel pump should i get for a mildly tuned 32 Gtr?

He recomended a Bosch 040, and i've seen Walbro 500hp in-tank pumps for $195 on sau.

Any experience or insight would be appreciated

-Michael-

Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/
Share on other sites

Bosch pumps are far superior to walbro.

Guilt-tripper told you Bosch, you trust him with your tune...so trust his advice on fuel pumps too.

The Bosch item is about $40 more...people who skimp on products are always the ones who scream the loudest when it goes 'pop'.

Its your fuel system...its keeping your engine alive...stick your hand in your pocket and put in a decent pump.

BTW...my 1000hp GTR uses an 040 as a lift pump.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489502
Share on other sites

Get a Bosch 044 and get it installed properly. Then it will be an intake pump :P And will run more HP than 040

if its a 300kw car an 040 would be better as all the 044 will do is cycle more fuel through the rail, unnecessarily heating the fuel and robbing the engine of horsepower.

Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489518
Share on other sites

You doing it youself or getting some one else to install it? If yourself, get a Nismo/Tomei one, piece of piss to install and no 1/4 tank bullshit surging. Trust me, when you have to install the 040 you will be kicking yourself for not spending the extra coin on the nismo/tomei one. They are annoying to install, helped to do one in my mates 15, never again.

Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489519
Share on other sites

You doing it youself or getting some one else to install it? If yourself, get a Nismo/Tomei one, piece of piss to install and no 1/4 tank bullshit surging. Trust me, when you have to install the 040 you will be kicking yourself for not spending the extra coin on the nismo/tomei one. They are annoying to install, helped to do one in my mates 15, never again.

slice of urine in a R32 GTR...15mins tops. If put in right (in the bucket with the proper mount and clip) it wont surge as the bucket is filled by the reg. return line.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489530
Share on other sites

Yeah but is that because you have done 14,000 of them? I'm sure if i did one again now, it would take me half the time. However if this is his first attempt (like mine was), im pretty sure there will be some swearing involved.

However maybe you are right and R32 GTR's are easy, never done one of them personally.

Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4489546
Share on other sites

Had same probs with gtr making 340kw running a little close to the edge fuel, Installed a Bosch 023 intank (using the DIY thread on SAU) and added an adjustable regulator bumping the pressure up a bit from 30 to 45 PSI and it has solved the problems.

Pump-$170 new

Reg-$165 new

Clamp-$5 new

Edited by doubled
Link to comment
https://www.sau.com.au/forums/topic/261997-fuel-probs/#findComment-4491987
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...