Jump to content
SAU Community

Recommended Posts

hi guys,

ive just purchased a 2001 250t RX four M35 stagea (aka volvo, been called a volvo 4 times in the first 2 days of owning it!) in pearl white. im in NZ by the way...

i had a couple of minor things to sort on it, mainly the tailgate auto close, which turned out to be a loose connection so all sorted.

the question i do have, there seems to be absolutely no release for the fuel flap/door. the door opens by just pushing the front edge of it, but there is a catch or lock of sorts on the flap (which seems to be stuck in the unlocked position).

do you guys have any form of release on your m35's?

thanks in advance...

p.s. totally stoked with the new car, glad i got a turbo one!

Link to comment
https://www.sau.com.au/forums/topic/262105-newbie-to-forum-and-m35/
Share on other sites

Vegie,

Congrats on your new car.

A month ago I brought a red 2001 250t RS four :)

When I picked the car up it had next to no fuel, don't worry I was at the service station trying to find a release switch or trigger :(

The trick is, if the car's unlocked so is the fuel door :) Once you lock the car the fuel door SHOULD be secure.

Try it out, all going to plan you won't be able to open the fuel door.

Anything else let us know.

when i bought my ARX the fuel flap release solenoid was sticky - sometimes it would unlock, sometimes it wouldnt.

The guy I bought it from got another one sent over from Japan, I changed it over and it's been fine ever since.

as bis-e said, lock the car and see if you can still open it. you sould be able to hear it click as you lock/unlock the doors.

if it's not working, you can get in there from the boot - there's a little hatch on the right-hand side. With a bit of maneuvering you can get the plastic out and then you're in the rear guard. There is a simple plastic "circlip" sort of thing holding the solenoid on - if you can get that off you should just be able to pull it out, disconnect the wires and swap it over.

I can probably get you the part number if you need a new one...

and welcome to the M35 family :)

Welcome to the M35 world of cars. Lots of fun to be had with these cars.

I swear you C34 guys must be jealous of our luxury.

But seriously, I do know what you mean. We have more in common with V35's but they are too slow with their N/A motor's.

They also think differently from us parctical drivers who prefer a wagon with a bit of room for the family and my toys.

Cheers

Andy

Welcome to the M35 world of cars. Lots of fun to be had with these cars.

I swear you C34 guys must be jealous of our luxury.

But seriously, I do know what you mean. We have more in common with V35's but they are too slow with their N/A motor's.

They also think differently from us parctical drivers who prefer a wagon with a bit of room for the family and my toys.

Cheers

Andy

HAHAHAAAA!!!

+1 :)

I swear you M35 guys need your own separate forum :(

Or maybe just a separate DIY section...

Edited by iamhe77
Welcome to the M35 world of cars. Lots of fun to be had with these cars.

I swear you C34 guys must be jealous of our luxury.

But seriously, I do know what you mean. We have more in common with V35's but they are too slow with their N/A motor's.

They also think differently from us parctical drivers who prefer a wagon with a bit of room for the family and my toys.

Cheers

Andy

im fine mate ....

gallery_16976_2955_133255.jpg

LOL @ wood grain is so 90s :P

I'd give my left testicle for the same set up, in carbon fiber that is.

The way I see it, if you want a Japanese Volvo, buy a M35 - if not and you want the real deal, buy a REAL stagea.

/puts on flame resistant suit and gets fire extinguisher ready .... :down:

The way I see it, if you want a Japanese Volvo, buy a M35 - if not and you want the real deal, buy a REAL stagea.

/puts on flame resistant suit and gets fire extinguisher ready .... :)

ha! boyracers with their OLD cars these days :blink:

just kidding, thanks for the welcome guys.

had a look into the fuel flap problem, and it seems the mechanism was just a bit dirty. cleaned it up and away it goes...

anyone had experiance with lowering springs in their M35's?

mine has had a set of IMPUL springs put into in japan, but the question i have is how low is too low? it also seems to slightly lower in the front too.

at the moment the bottom of the front bumper lip is about 100mm of the ground, and the front crossmember maybe 90mm ish at best. i dont want to be playing mr plow and having to get under there to remove any roadkill/street pizza in the near future...

anyone had experiance with lowering springs in their M35's?

mine has had a set of IMPUL springs put into in japan, but the question i have is how low is too low? it also seems to slightly lower in the front too.

at the moment the bottom of the front bumper lip is about 100mm of the ground, and the front crossmember maybe 90mm ish at best. i dont want to be playing mr plow and having to get under there to remove any roadkill/street pizza in the near future...

mmmm, that is low. Mine is an ARX so started life at 180mm clearance and I fitted Bilstien shocks and springs that lowered it around 45mm. So should be around 135mm clearance now. Also the front bar has a bit more clearance than the RS and RX models.

I know some others fitted bilstein shocks and other brands of springs, some were initially too low so they have either raised the front on different circlip settings or changed springs to increase height.

I am very happy with my height as I don't scrape in the city unless I have a full load (5 people + luggage) and then I can occasionaly rub the bellie.

Any lower on the front of the ARX and the wheels would scrape on the wheel arces as they just touch when going into driveways.

Are the front shocks adjustable?

Cheers

Andy

anyone had experiance with lowering springs in their M35's?

mine has had a set of IMPUL springs put into in japan, but the question i have is how low is too low? it also seems to slightly lower in the front too.

at the moment the bottom of the front bumper lip is about 100mm of the ground, and the front crossmember maybe 90mm ish at best. i dont want to be playing mr plow and having to get under there to remove any roadkill/street pizza in the near future...

Hmmm, that does seem awfully low. You can always swap your Impul springs (and shocks?) for my stockies. :/

~130mm ride height, but I have to still be careful not to scrape my exhaust.

I guess you could always take a trip to Pedders and get something there that would raise the height... would probably be cheaper than getting Bilsteins, Nismo's or Tein's from Japan.

Or maybe the shocks have had it?

(You did only specify that you only have Impul springs and not the shocks as well)

i wish people would stop rubbing all their good mods in our faces!!!

haha id be sticking with a well known brand name, probably something ex-japan for our cars. you know they have been designed and tested on them properly. not like some australian companies that use re-set springs that break after a few thousand ks.

thats what id do anyway. but im happy if anyone wanted to lose their brand name springs/shocks and id be happy to part with my stockers for free :D

i wish people would stop rubbing all their good mods in our faces!!!

haha id be sticking with a well known brand name, probably something ex-japan for our cars. you know they have been designed and tested on them properly. not like some australian companies that use re-set springs that break after a few thousand ks.

thats what id do anyway. but im happy if anyone wanted to lose their brand name springs/shocks and id be happy to part with my stockers for free :3some:

tempting offer :) but no thanks,

it appears that the shocks are stock ones, with the springs fitted later. if i can find some reasonably priced shocks only, i think that may be the way to go. the shocks are feeling a bit sad to be honest.

so far i have found that the car has the impul springs and a Kakimoto cat back exhaust fitted, but other than that it doesnt look tampered with. still, you never know what else has been done...

roughly how high is the front crossmember meant to be off the ground with stock springs in a 250t rs/rx four?

and another thing ive noticed is the tyres are 215/50 17's, whereas i think they are meant to 215/55 17 stock. or so the sticker for tyre pressure says anyway. the reason i looked is the speedo "seems" a touch high in reading. might borrow a GPS and check.

tempting offer :woot: but no thanks,

it appears that the shocks are stock ones, with the springs fitted later. if i can find some reasonably priced shocks only, i think that may be the way to go. the shocks are feeling a bit sad to be honest.

so far i have found that the car has the impul springs and a Kakimoto cat back exhaust fitted, but other than that it doesnt look tampered with. still, you never know what else has been done...

roughly how high is the front crossmember meant to be off the ground with stock springs in a 250t rs/rx four?

and another thing ive noticed is the tyres are 215/50 17's, whereas i think they are meant to 215/55 17 stock. or so the sticker for tyre pressure says anyway. the reason i looked is the speedo "seems" a touch high in reading. might borrow a GPS and check.

Hmm Kaki cat-back? Any chance of recording the sound for me? would love to compare it to my Fujitsubo.

How does it ride with stock shocks and Impul springs?

Yep, shock wheel size is 215/55/17. According to the tyre calculator here your speedo should be displaying 3.2% too fast ie, you are travelling 3.2% slower than your speedo is showing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...