Jump to content
SAU Community

Recommended Posts

Hey all,

I was told about a news article about the first house being rebuilt in Traralgon in Steel Framing.

Did anybody tape the news last night?

Could you host it somewhere?

Did anyone see the story?

All help appreciated.

Cheers

Pete

Link to comment
https://www.sau.com.au/forums/topic/262597-channel-9-news-last-night/
Share on other sites

dude, the last thing you want in a house is steel framing, they started doing it in the 90s, then stopped because it was just stupid, when a frame is made out of steel, in the summer, or winter depending on temperatures, all you hear all day is creeking and expansion noises from the steel, its a poo idea i say. pooo

dude, the last thing you want in a house is steel framing, they started doing it in the 90s, then stopped because it was just stupid, when a frame is made out of steel, in the summer, or winter depending on temperatures, all you hear all day is creeking and expansion noises from the steel, its a poo idea i say. pooo

nope, i have a steel frame house. I've lived here for 8 years since new and no "creeking and expansion noises" at all. ever.

stops any termite problems.

Steel has been used for framing for a long time now. It has many advantages over alternative materials such as being 100% termite resistant, consistent in strength and allows design flexabilty over alternative material for this reason. stays straight etc

Steel will expand and contract no different to alternative building materials so very unlikely it would be noiser. I have never heard my steel garage make a noise yet after 6 years. Have spent a fair bit of time in their too much like many of the members here im sure. lol

makes alot of sense building with steel these days.

I'm a few days behind in the news... ...But I'm sure I've got 7, 9, & 10 for tuesday the 24th... ...I'll have a look tomorrow after work and YouTube it for you...

If you wonder why I've recorded the news... ...I just look for funny things to put up on YouTube... ...I really want the weather guy on 10 to snap and hit some kid one day... :banana:

I'm a few days behind in the news... ...But I'm sure I've got 7, 9, & 10 for tuesday the 24th... ...I'll have a look tomorrow after work and YouTube it for you...

If you wonder why I've recorded the news... ...I just look for funny things to put up on YouTube... ...I really want the weather guy on 10 to snap and hit some kid one day... :banana:

got tonights ten late news? i am after the smart phone thingo, missed it :bunny:

got tonights ten late news? i am after the smart phone thingo, missed it :banana:

I don't do the late news... ...But you're lucky tonight... ...I just got that on the tail end of Life... ...PM me your e-mail and I'll send it to you now... ...Can't be bothered with something like that on YouTube...

If anyone sees anything on the news or hears about something they missed... ...If you PM me within around 24 hours... ...Most of the time I'll usually still have it and can send it too you...

Clutch.

Sorry mate but you are clearly uneducated and ill informed about this.

Steel Houses DO NOT CREAK. This has been proven bu the CSIRO and was found to be no more than a myth perpetrated by the timber to protect market share.

Steel is recycleable. Timber is not. Of ALL the steel possible to be recycled in Australia, 80% is, and of that 80%, 95% is actually recycled and turned into new steel. We dig the iron ore up once, turn it into steel once, and then re-use if for the next 100,000 years.

Timber converts a lot of Cardon Di-Oxide to Oxygen during it's grow process, and then releases all that carbon back into the atmosphere as it degrades over the next 50 years. AVerage life span of a galvanised steel house frame..... 800 years. As proven in accelerated scientific tests.

To protect timber from Termites and/or Rot you need to treat it with harsh chemicals, how knows what they are doing to people..... Remember Asbestos?

RBPOWA, The blue coating on the "TrueCore" material is simply a blue ink/tint in the final Chromate layer. It's simply a branding exercise, and that steel (Bluescope's ZincAlume) is not actually 100% correct for use in Steel Framing, normal Z275 Gal is better, as you don't need to use a membrane underneath the steel on concrete slabs. Having said that though, in the vast majority of cases, it's no problem to do this.

New?

Haven't JG King been using Steel frames in every one of their houses for nearly 10years?

Pretty sure that if the frame creaked, they would have reverted back to wood.

I am sure there are other builders that use steel as well.

Edited by iamhe77

Correct.

Steel Framing has been used exclusivly by JG Kings for many many years.

Steel is slowly gaining share over timber as the public are educated into it's un-questionable advantages over timber.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...