Jump to content
SAU Community

Recommended Posts

Hey i'm trying to work out what I need. I have a set of butchered 34 xenons wich dont work.

Just wondering the housing on the right hand side has d2r 35w, hir1 65w printed on top. The left housing has h1 55w,hir1 engraved over top of the print. Fairly sure one has had the compliance chop and one hasnt considering one missing ballast. can anyone recommend wich kit to order to get these lights to a near factory result.

sorry if i have missed something obvious, just a little confused :D !

If the headlights are out of the car pull the covers off and have a look at where the bulb go in on both of the headlights look at the one with d2r on it then the other ona with the h1 and there might be a plate in the h1 headlight that can pop out and a d2r bulb will fit. Have a look in the tutorial and you will see the part im on about. Get the d2r bulbs.

Has anybody here purchased the 8000 one yet? If so, can u post up pics, still undecided whether i wanna go 6000 or 8000

I just fitted 8000k bulbs to my car ill take a photo when i get a chance and post it up.

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

seeing nytskys pics almost made me change my mind! im glad i saw nagas pic, dont want them to stick out like dogs balls, just need something brighter as the factory low beam is shithouse at night time and highbeam lights up the whole fkn street haha

As this GB will be ending soon i have some surplus kits that need to go ASAP, which include:

1x PHILIPS H11 4300k ($225 Delivered)

1x PHILIPS H7 4300k ($225 Delivered)

1x PHILIPS H4 Bi-Xenon 4300k ($299 Delivered)

1x PHILIPS D2S 6000k ($225 Delivered)

Price can be slightly negotiable for serious buyers.

heres some of my 6000k install

20090520_7146-e.jpg]

Damn dude, thats some nice photography!

Dave, you havn't seen any way to hook up two sets of HID's to the same ballast have you? I really want to go something hardcore blue in the foglights but the problem is mounting another set of ballasts somewhere :cheers:

I have 8000K halogen bulbs in there at the moment, but i seriously doubt they are 8000k since my 6000k HID's are more blue.

I have recently been informed by the supplier that H3C are only available in the Helligkeit HID kits.

Hi mate,

having a few concerns before installing the Bosch "H3C" kit you sent me.

Firstly the box claims to be made in germany but the package was posted in china.

Secondly the english in the instruction manual is pretty poor and the "C" in "H3C" is hand written in pen.

Thirdly the adapter to connect the existing plug in the headlight to the ballast is missing (circled in red in the diagram below)

ii_hid2.jpg

and lastly the distance between the connector plate on the globe and the globe itself is different to the H3C globes in my car already which i assume matters in projector style headlights.

I'm sure i could easily modify my setup to match, but before i do i want to ensure that i've got the correct thing.

I'd rather not modify it since i would like to have the option of returning to the original setup in the future.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...