Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Nah, it's just Ferarri's in particular really, especially those like the Enzo and the FXX which are closer to an F1 car than anything street legal. I'm not interested in it if it can't be driven on a public road in some form. The engine note of that thing is like a buzzing insect close to the ear!

You can buy them, but they aren't road legal - anywhere. And they stay under lock and key at Fiorano, and you only get to drive your car at Ferrari organised/endorsed track days.

But apparently they do use them for product development, so for the $squillion dollar cost, you get to be a Ferrari test driver.

EDIT: You can't actually buy one, like most of the hyperspecial ferraris now, you need to be one of Ferrari's 'preferred customers' (ie, absurdly rich and already own several Ferraris) to be invited to buy one.

oh.... so they get joe public to fund the car and the R+D, but they get to keep it? bit of a rip..

ohhhhh... now i know where the FXX is familiar.... it's mentioned when people talk about the SpecV brakes! apparently the CC brakes on the SpecV are the same as the FXX

  • 3 weeks later...
I don't care much for Fezzas but check these videos out:

Was built for a customer off the Enzo platform, he had that much money that he went back and asked Ferrari for permission to restyle it for him with some other makers to resemble the older Ferrari's that he loved.

Personally think it looks shit, but respect for how much work would have to go into that to transform it into what it is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...