Jump to content
SAU Community

Recommended Posts

  • Replies 335
  • Created
  • Last Reply

Top Posters In This Topic

It depends on which series and year it was made. The R33 GTS-t coupe weighs in at 1360-1370 usually, with the sedan coming at 20kg more on all variants (which is where the 1390kg weight would fit in).

The series 2 R32 Type M coupes weigh in at 1320. I don't know why they added 60kg on between series 1 and 2 for the R32 but it's gotta be the worst of both worlds. The power of an R32 with the weight of an R33 :D

Equipment like turbos, bigger brakes, active LSD, ABS, air bags, bodykits, sunroofs, etc all add weight, so it's impossible to say "all R33's weigh Xkg and all R32's weigh Ykg." It varies by a fair amount.

Originally posted by -Joel-

I alwas thought the R32 weighed in at around 1280kg's.

I might have to throw it on the weigh bridge up near home.

Well, it does :P But give or take depending on what year model and what options it has.

Hi guys so many posts on this thread while I was attending to some Bathurst business. Let me try and catch up...

Firstly, I noticed Wolf updated their web site when I pointed out that it did not show any Plug In ECUS other than S14 200SX. Glad to be of help guys.

Hi Steve-SST, I have read a few of your articles and noted the type of work you do on cars and your philosophy is not much different from mine. Which is a little unusual, there are a lot of people who are only interested in the single maximum power number. It is good to have someone with your experience and skill contributing, I really appreciate your contributions to this forum.

But (there is always a but, isn't there?) you are a Wolf dealer, so it is in your own best interests to promote them. I would like to give Wolf another try, but I keep adding up the cost and it works out more than a Power FC, a proven product. Why should I take the risk? When there is no cost benefit. There is more mechanical work involved in fitting a Wolf, which equals even more cost.

To answer the technical differences question please refer to the post on Wolf Vs PFC.

Sydneykid, Glad your back, thought we had upset you:D Steve does sell other ECU's and does tune PowerFC's, but if the costs are equal then the Wolf has far more features and comes with laptop software which makes it easy to tune.

Mechanical Work involved in fitting the Wolf? Surely not with the plug'n'play's, which are as easy to install as a PowerFC.

I was quoted $500 to tune the Wolf3D to suit the new motor/turbo/injectors.

PowerFC is a good option however the Air temp/Engine temp compensations with boost/ignition and fuel sounds very very attractive.

I would rather feeling safe to put my foot down just after sitting in a traffic jam and knowing that its going to pull some boost, timing and dump a little more fuel in as not to detonate.

Especially spending close to 10k on a motor/turbo/injector setup.

Well done Buster, that's a great effort. I reckon there is another 0.4 second and 3 mph in it. Please send it in to the HPI boys, we only want Skylines on that page.

Hi GTS-t VSPEC, maybe I missed something, how do you get a MAP signal? Or a knock signal? Without doing anything other than plugging the ECU in?

Com'on Steve-SST, "a map sensor lines no big deal", maybe for you and me, but it stops the Wolf being truly plug in and go. What about fitting a knock sensor, that's not so easy? Since an often quoted advantage of the Wolf is no airflow meter, don't you have to physically remove it? Fabricating and mounting a replacement is quite tricky, especially if you want to take full advantage of not having an AFM, by replacing the entire inlet pipework. These are not easy, 5 minute jobs for a backyarder.

I have a question that's been hanging around for while maybe you can help me with.

When you fit a MAP sensor do you run a hose from the plenum to the sensor? Is it mounted inside the cabin? On the firewall? Somewhere else? Or do you mount the MAP sensor itself direct on the plenum?

If you run the hose from the plenum to the sensor, do you find any delay in response? It takes a few 10ths of a second for the pressure to travel through the hose, so having it as short as possible would be a good idea. Mounting it on the plenum would of course be better but it involves some fabrication work. So is it worth it? ie; is the improved response noticeable?

Thanks for any help you can give

We can run internal or exturnal MAP or MAF or even TPS V MAP for GTRs with no MAF can you?No. Like Autronic ECUs Wolf has no problem with the inbuilt MAP sensor but we can run with different options if we want.I'm finished with this thread so please only post the facts.

Sorry Steve, what did I say? All I asked was, in your experience is the improved response worth the trouble of mounting a MAP sensor on the plenum? Compared to running hose from a remote MAP sensor.

It is just that I have never tested it back to back and I wondered if you had.

I apologise if it came across as anything else.

Originally posted by GTS-t VSPEC

I hope the 50% lands on my engine still being in-tact.

Paul, I think the only area you may have dramas is with your injectors running dry, as you are already at 90% - boost isnt too high, and the bottom end should be fine for acouple more pulls - easily. Remeber JMS red R33 put down 446odd rwkw with stock bottom end - you are *only* running 411rwhp:D

Anyways, good luck hope all goes well and those injectors dont decided to call it a day.

Ive now read several posts concerning the JMS RB25 making 446rwkws.

Can someone shed some light on this engine, namely the turbo setup it was running and whether the thing was an import yard special, namely "we have 50 other RB25s out back so if she blows...mehh who cares"

I suspect the engne was a bit of a Saturday "qualifying special" and was never intended to see extended service as a street car/track car etc. Could be wrong but interested in hearing more about what was actually achieved on std internals

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No. GKTech arms have spherical bearings in them. No bushes. You will not need bushes for those arms. The sphericals are a bit of a maintenance nightmare. I have replaced all of mine several times in the 5 or so years I've had them, and I have the arms out regularly to clean and lube the balls. Worth the pain on an R32, because the standard arm design is trash. If you need the camber adjustment, there are other options (than the GKTech ones), although I would still lean towards and prefer the GKTech ones, even with the maintenance load of the sphericals. The caster adjustment is also highly valuable, allowing for setting the car up to drive straight. There are a million options for these, including the GKTech ones. I've had Tein rods on mine for 20 years and the balls are much less trouble in that location. Never given me a moment's pain. All positives, no negatives. I consider them compulsory.
    • Lol yeah I ordered the clips mentioned and as far as the amayama diagrams go i think thats all I'll need. Fogured id ask, sometimes people's first hand experience doesnt always match up to diagrams haha, i guess I'll wing it and worse comes to worse I'll just deal with it as I go
    • Thanks for all that information I appreciate it. To answer your questions: - Yep that's what I mean. These guys are professional painters to so I must be missing something. It's a bit hard to explain. - With the primer landing on clearcoat, I make sure that the surrounding clearcoat is scuffed to 240 grit as my epoxy primer says that I only need to sand the area to 240 grit. - Yeah so similar to the first question, assuming that the paint landed on the unscuffed clearcoat because I've seen that happen. - Yep I want to prep the surface in that order. Only reason because epoxy primer will protect it from rust and I need that atm with this crappy Sydney weather. I think I was worried about time, if I try to put the filler down but screw it up somehow and I don't have time to sand it off and reapply it then need to put primer later that it might start to rust again so I wanted to apply the primer as quick as possible to not deal with rust.  - I just deleted some answers, I just realised after watching a video and what you said about looking at the data sheet, that I need to read the data sheet on the specific filler I'm using. It's possible now that I put epoxy primer first was a waste of time and need to go to bare metal lol
    • I did. I went to a suspension guy and he told me because I don't have adjustable camber arms it's the reason why my car veers towards the left if I take my hands off the wheel but if I drive my other every day car and take my hands off the steering wheel it goes completely straight. I think it's common with Skyline's. In order to fix the problem, I likely need gktech camber arms then nismo bushes since I have poly bushes atm, then a wheel alignment after that. With my car if I take my hands off the steering wheel on a really bumpy road before stopping at a light I have to hold my steering wheel somewhat tight otherwise my car will legit just go completely in the other direction quite quickly and I'll slam into something lol instead of stopping straight. I Believe this YouTuber had the same issue and fixed it with gktech arms. At timestmap 6:05 he talks about how the car doesn't veer anymore after installing these arms.  
    • hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
×
×
  • Create New...