Jump to content
SAU Community

Recommended Posts

Parting out White R32 GTR. Currently have the front half as a half cut, and the rest is in parts

Fell off road on driver side RH Qtr panel hit bad, can cut off good left hand quarter panel .

Items listed below: See link for pics

Front cut includes 76000 km Motor/Box/Loom/ECU/brake master/Clutch master and slave/new twin plate clutch/ dumps/dash/turbos and just about everything you'll find in an engine bay, except cooler and piping. - $6000 or near offer.

Fuel pump $140

Fuel Door $40

Fuel tank $40

Drivers Door (Trim+Cont) $50

Passenger Door (complete) $150

Rear Reo Bar $50

Rear bumper $200

Rear Tail lights Pair $120

Rear boot lid (wing + badges) $250

Rear reverse lights Pair $30

GTR Steering Wheels x2 $100ea

Left Front Indicator $90

Fog Lights (Pair) $75

Factory Cold air box $80

GTR Grill $130

Front Reo Bar $50

Front Bumper (2x cracks) $200

Twin Factory Dumps $5

Blitz FMIC $250

HKS Piping (RB26DETT) $150

Side Skirts $150

Set of Side Pods $150

Right F guard (damaged) $250

Left F guard (perfect) $400

Pair Headlights $350

Left Front Guard Liner (perfect) $80

Rear GTR coilovers $150

Front Trust Coilovers $200

Aluminium Bonnet $300

Rear seats $10

Glove box $10

Factory Gear Knob $2

Momo gear knob $5

Rear cradle $400

Tailshaft $200

Rear callipers, rotors $400

Front callipers, rotors $500

Rear sway bar $200

Front sway bar $100

Front LCA (pair) $200

Front Upper Arms $100

Seat belts x4 $80

R32 GTR Diff $900

Radiator $175.

PICTURES : http://img291.imageshack.us/gal.php?g=dsc01036.jpg

Either PM me or call on 0403 071 294.

Located in The Gap, Brisbane. Would prefer pick-ups, but talk to me. Bulk buy discounts a specialty

Thanks

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Tomek, will get you specs and better pics of Blitz FMIC, please allow a day or so!

BWRGTR, will answer PM when it gets into my inbox, please wait till morning/

thanks

guys

hey mate, what year r32 was it? do u have much of the interior left??? after some interior parts if its a later model r32 cheers

Year is 1993, and yep most interior available, cept the back seat, its sold, best to pm me what you need, even better come by, if you in Brisbane datimes anyday ok

tks

PM SENT, I will take the factory gear nob!

No probs, I am getting heaps of pm's forgive me if I dont get to you ASAP, call to make a time to come get it, or anything else you want!

tks

hey mate do u have most of the boot interior?, i'm after the two side panels eg covering for jack placement, and a fair few clips to hold panels in

cheers

hey mate do u have most of the boot interior?, i'm after the two side panels eg covering for jack placement, and a fair few clips to hold panels in

cheers

Duff man

som stuff avail, best to get here and have a look, boot is full of stuff, like that, see,look, makeoffer, buy, go away, be happy!

tks

Guys, the GTR supermarket of parts is gonna be open this Saturday morning, got four members from other forums, and two from SAU coming, anyone else welcome, though looks like fmic and hks pipes may go tonite.

pm or ph 0403 071 294, make time for Satday, and get address then, bring tools maybe still stuff you want on car, but most is off and ready for pickup

tks

Hey mate, wondering if you have the front driveshaft, the one going from the transfer case to the front diff. If so how much do you want for it?

Cheers

Hey mate, wondering if you have the front driveshaft, the one going from the transfer case to the front diff. If so how much do you want for it?

Cheers

Do, but it will go with the half cut, whatabout you get together with some peeps and grab the cut, and all take what you need etc? some others want engine bits, some want the box, some wnat head, etc, we are not going to dismantle the motor/box combo,

welcome to inspect, have camer footage of motor running two weeks ago, very strong.

guys, scroll through post to see what is sold, I cant work out how to edit original post, anyone help me with this?

Now also sold

Blitz FMIC

KKS cast alloy pipes

both was local pickup

sorry guys, but still plenty other stuff avail

ring to make arrangements to look, few members coming on Sat 9tomorrow morn)

tks

front reo bar now sold

Got a S14 200sx ADM full compliance, in stocko mint cond, unmarked interior, and straight exterior, Luxo model with spolers/lips/sunroof etc,older lady owner, taking out motor/box/ecu/loom for another car, so this mint rolling almost complete car gotta go, $4500

yep I know shouldn' be here, but hay, sumwun grab this, and the halfcut rb26dett I got, and could be a project?

You still got the stock BOVs mate?

Despo on grabbing at least 1 for my RB20 :cool:

Hit me up on PM, don't come round here that much.

Pm sent, have two sets avail, $150 ea stock r32 rb26dett gtr units

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...