Jump to content
SAU Community

Recommended Posts

I believe - for things like pins, bonnet scoups and so on... if they fall outside whats legal (and basically all of them do)

Then its an engineers, same as a non factory motor, brakes, suspension and so on that affect the car over general roadworthy...

By general i mean things like tyres, head/tail lights, seatbelts, "H" pattern on gearknob... all that pissy stuff in otherwords :)

So you would have filled the non-general. just because you put the factory bonnet on doesnt mean you aint going to swap it back later ;)

Same as the EPA has an apparent 3-strike rule... if you get 3 basic exhaust noise tests then they haul you in for a full EPA to check as obviously your swapping out mufflers and whatever else. Or they start taking pics and then your really fked.

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

hahah i got yelled at tonight for my S2 driving lights... aparently i'm not allowed to have them on

No you are not, if i could i would smash everyones with a hammer, they shit me.

do you need an engineers cert for changinging the brakes and suspension setup? so say new brakes, brake lines, LCA's shocks springs steering arms etc? also for a new rear axel and diff? or... yeah

No you are not, if i could i would smash everyones with a hammer, they shit me.

Mr. Series 1 a bit jealous :D hehe its ok i've been there!

lol just kidding, anyways ive drven past many series 2's with thier driving lights on.. doesnt phase me... however the cop referred to them as "fog lights" and i thought fog lights were yellow, which i know are illegal when not foggy... but i never knew driving lights were illegal...

Mr. Series 1 a bit jealous :D hehe its ok i've been there!

lol just kidding, anyways ive drven past many series 2's with thier driving lights on.. doesnt phase me... however the cop referred to them as "fog lights" and i thought fog lights were yellow, which i know are illegal when not foggy... but i never knew driving lights were illegal...

my s1 has fog lights, cant put them in tho coz they hit the intercooler.

hahah i got yelled at tonight for my S2 driving lights... aparently i'm not allowed to have them on

http://www.vicroads.vic.gov.au/NR/rdonlyre...104/0/VSI20.pdf - January 2000, Page 7, Q57

Q57: When can i use the fog lamps on my car

A: There is no restriction on the use of front fog lamps. However the lamps must be correctly aimed as fog lamps so as not to dazzle other road users. Rear fog lamps may only be lit in abnormal weather conditions

Found that little bit of information interesting, however there may have been a new rule put in since then. If anyone has it in writing would be good.

Those rear lights are f**king blinding too, i use to do a run to warrnambool and back every night, one night i was following a chick in an excel and every time she put her high beams on she would put on her fog lights, no need for them but she did it every time and the rear light would light up the cab of the truck, in the end every time she put on her fog lights i would put my high beams on, did it all the way from colac to the next major town which i cant remember the name of, probably a good 50 k's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia body...
    • This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
×
×
  • Create New...