Jump to content
SAU Community

Recommended Posts

Checked your oil and made sure the pump is working? We were cruising around in a friends car and it started ticking pretty loudly, we thought nothing of it, then 5 minute later we had a seized engine.

Not meant to scare you, but better to be safe than sorry!

did it all of a sudden come on or has it been a gradual sort of noise over the months/years... It could be a noisy lifter so maybe u should give it an oil flush when changing oils, otherwise maybe it could be the oil pump? Either way i'd check it out asap as rebuilds aren't cool.

Guys,

try the old screwdriver test. What you do is get a long/large screwdriver, with the engine running, CAREFULLY place the blade of the screwdriver against various parts of the engine or on the components bolted to the engine and then place your ear against the butt end of the screwdriver and listen for excessive noises. If you're unsure how loud the noise should be check the same spot on a mates car. Good way to isolate a noise to a certain area.

JUST BE CAREFULL !!!

The NVCS solenoid on my car goes spastic every now and again. Makes a great clicking sound, sounds similar to a popcorn machine at full tilt. Just by holding the back of the solenoid where the plug goes into it stops it, just too lazy to fix this on a more permanent basis.

Originally posted by DoughBoy

just too lazy to fix this on a more permanent basis.

hahahaha i like ur style:D

the ticking whilst cold , as said above is the lack of oil in the top end so lifters will tick.

not too sure with skylines but in the vl , hydraulic lifters always after years of use seem to tick , and take a while to "pump up" when cold.

a water pump most likely wont make noise at idle , it is more a load thing , hold it at 3k revs , in neutral , and listen for a definate clunky noise , more evident than a tick noise.

sounds similar to a thrown big end bearing.

injectors make a constant tick tick tick , be it hot or cold , day or night.

injectors/lifters tick (probably a dupe but i cbf reading all the posts :()

mine does that fairly audible on idle with bonnet popped and head in engine bay, but if its from in the car whilst accelerating, more than likely u got a missing exhaust manifold bolt like me, dont worry about it unless it starts getting worse or the cars feeeling crap/doing something crappily noticeable :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...