Jump to content
SAU Community

Recommended Posts

All items are in Sydney

Pickup for heavy stuff only. Can post smaller items if required.

PM or call 0416275449

Items:

R34 stock suspension - complete springs and shocks (some worn shocks, but still OK for defects etc), front castor rods (need new bushings), rear lower arms, Hicas setup, swaybars front and rear. $40 pickup only

Pair of Bridgstone Potenza 225 40 17s. About 40-50% tread with a bit of camber wear - $40 pickup only

Pair of Continental 225 40 17s. About 40-50% tread. Even wear - $40 pickup only

Can do a deal on both pairs too!

Autogauge oil temp gauge in deg C. 5 1/4 Black face with silver surround ring. Never installed. Comes with suitable sensor, and instructions mount etc. $35

Dual 5 1/4 gauge pillar pod. Designed to suit R33 I believe, but dont quote me! $20

Front lower strut brace to suit EG civic / Delsol in brushed alloy $20

2 inch stock exhaust to suit Subaru RS Impreza. Close to brand new. Replaced just after getting the car. Comes with mid pipe, tail pipe, cat and muffler. Worth it just for the new Cat! - $20 Pickup only

2 Momo gear knobs. One leather with alloy, the other is full chrome. Both used. $30 each

Swaybars are standard R34 bars. Nothing fancy. Willing to sell as a overall package only sorry! Got to get rid of this stuff as I am moving house soon.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...