Jump to content
SAU Community

Recommended Posts

Just reading the May issue of MOTOR mag......

"In fact,late 2007.I toured the GTR production facility and I asked

a Nissan engineer point-blank about the longevity of the engine.

There was,he said,no reason to suspect that the GTR bores would last anything less than 300,000 km,

and possibly even more" (Page103 Motor Mag)

This was in response to as he says....

""Forum after forum of worried punters,grieving because they might

have to buy a new engine instead of simply boring......................."

"This ignores a couple of salient facts:"

" a) Most of the nongs who populate such forums rather than the real

world are about as likely to buy a brand new GTR as I am of voting

for Family first.."

" b) since the coating is so tough in the first place,it'll last longer than any

conventional liners anyway."

Words by David Morley "Motor" mag.....

Link to comment
https://www.sau.com.au/forums/topic/265754-plasma-coated-bores/
Share on other sites

Well I know where he is coming from, as I read quite a few times on forums etc that because of the plasma lining the GTR would need to have a service at 100,000km that would involve the engine coming out to recoat the cylinders.

Based on the facts in the Motor article, this appears grossly mis-informed.

Edited by r32line

whenever this pops up i'm always saying it's just internet rumour b.s., like so many other things floating around this car.

the logitics of a complete re-lining of all cylinders is so far beyond what practically all dealerships around the world could ever dream of being able to handle, should tell people enough that there is no way at 100K km you'd be able to drive your car in for it's scheduled "major" service.

that and the fact that despite all these cars being officially delivered, there has not one dealership anywhere in any market saying you'll need to come back in at 100K km's mate, we'll just need the car for a few months

all complete fantasy.

So does this need to happen when the car reaches 40,000 Km? If so, do you know how much it is?

No you only have to get it done when you fill up with Petrol, I have had mine done 3 times now, it is booked it for when I fill up this afternoon. ;)

The 40k rumour is a complete respray of the car......it goes so fast the paint peels off so to keep it in good condition you need to have it resprayed.

Hope the information helps.

Just reading the May issue of MOTOR mag......

"In fact,late 2007.I toured the GTR production facility and I asked

a Nissan engineer point-blank about the longevity of the engine.

There was,he said,no reason to suspect that the GTR bores would last anything less than 300,000 km,

and possibly even more" (Page103 Motor Mag)

This was in response to as he says....

""Forum after forum of worried punters,grieving because they might

have to buy a new engine instead of simply boring......................."

"This ignores a couple of salient facts:"

" a) Most of the nongs who populate such forums rather than the real

world are about as likely to buy a brand new GTR as I am of voting

for Family first.."

" b) since the coating is so tough in the first place,it'll last longer than any

conventional liners anyway."

Words by David Morley "Motor" mag.....

well I've only been saying this since DECEMBER 2007!! and posted it on the forum at that time too. but no one listens to the poor old beer baron. I asked nissan japan myself way back then and the engineer that I asked nearly fell off his chair laughing at me when I asked if the engine needed a rebuild every 100K kms. he then explained than even the RB26 will live for well over 200,000kms without rebuild (in standard form) and that the VR38 is more advanced and that the plasma coating extends engine life, not reduces it.

well I've only been saying this since DECEMBER 2007!! and posted it on the forum at that time too. but no one listens to the poor old beer baron. I asked nissan japan myself way back then and the engineer that I asked nearly fell off his chair laughing at me when I asked if the engine needed a rebuild every 100K kms. he then explained than even the RB26 will live for well over 200,000kms without rebuild (in standard form) and that the VR38 is more advanced and that the plasma coating extends engine life, not reduces it.

My apologies..... :P .....Just conformation.

My apologies..... :P .....Just conformation.

lol, no worries mate. I wasn't pissed. just I have a sore voice from saying the same thing for 1 and a half years now! but yet still no one believes me. :D maybe they will believe morely....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...