Jump to content
SAU Community

Recommended Posts

now thats an out of the ordinary kit right there! wild look for sure!

But it reaks of overdone to me as some of the lines match poorly, giving it the batman look. I know its a wide body kit and they tend to do that, but i think its the upper door line and the mix between sharp edges and curves at seemingly random places thats turning me off saying its top notch! What do you think Jap Muscle??? are ya digging the flow line near the wing mirrors???

One things for sure that right there would turn heads everywhere it went!

Edited by TR11KY

i defiently do like the rear gurads but like what you said, not a big fan of a few things like the front guards, just a bit to sharpe and overdone. also not a fan of the front bar.

ideally id be doing something like that but replacing the front bar and guards.

with the amount these things are worth maybe you might wanna go custom?

+1 uras dosnt do it for street cars inho, have u heard of sunline racing?

77713256.jpg

now thats an out of the ordinary kit right there! wild look for sure!

But it reaks of overdone to me as some of the lines match poorly, giving it the batman look. I know its a wide body kit and they tend to do that, but i think its the upper door line and the mix between sharp edges and curves at seemingly random places thats turning me off saying its top notch! What do you think Jap Muscle??? are ya digging the flow line near the wing mirrors???

One things for sure that right there would turn heads everywhere it went!

i defiently do like the rear gurads but like what you said, not a big fan of a few things like the front guards, just a bit to sharpe and overdone. also not a fan of the front bar.

ideally id be doing something like that but replacing the front bar and guards.

with the amount these things are worth maybe you might wanna go custom?

Hell Yeah!

The Sunline Racing is one tuff mutha f**king R34 GTR.

C-West N1 Type III Front bar with modified front guards based on the Nismo Z-Tune ones.

Side Skirts seem to based on the C-West and the rears are pretty much bolt on wide rear guards.

With a nice Satin paint job = Looks mint!

But this is body kit for a 2 door R34, I think he wants a 4 door kit.

that kit is also ment to fit gtr's not gtt's and also that kit happens to be made completly from carbon fibre, from memory the front gaurds, side skirts and rear gaurds will set u back around $3700 then u need to use your own front and rear bars

also its the same kit being used by the high octane boys, they used a different front bar tho

Edited by UWISSH!

na looking 4 one 4 a 2 door just droped a rb26 in her so i think might be time 2 do sum body work i resprayed it bout 2 years ago so time to go wide as i want sum fat dish rims on her

  • 2 weeks later...
crossfactory 2dr kit...

www.rhdjapan.com

expect to pay 10k delievered

there is a bodykit thread for R34's in this section, do a search for it, should have most kits you will find for an R34

Got the Cross Factory kit here original and hand crafted in Japan.

Got a thread selling em cause they costly to put on and ran out of cash after getting em all the way here so it might be of interest to you.

Although your after a 4 door kit...the front guards should fit no problem if you wanna buy em off me.

threads in the sale section PM me if interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...