Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

This was a complete r32 gtr 1990 model red,took it to have some small body repaires done and found rear railes rusted out to dangerious to keep driving so i am wrecking.

I advertised in tassy first as that is where car is,freight around aust is very resonable.

Already sold some parts listed below

front bar and reo

radiator and grill

front and rear seats

passenger door

abs unit

some interior parts

The rest or the car is for sale.this car was driving around 4 weeks ago.

Engine complete with everything,computer,loom,afm,air pods,clutch,gear box,fuel pump,turbo's I mean everything just put into car power up and drive away.$5000.00 plus freight and i will organise for buyer.

Complete brake system 4xdrilled disc's and 2x front calipers and 2x rear calipers,brake pads for both and fluid lines.$600.00

4 Nismo lmgt2 17 x 9.5 light weight wheels cw tyres to suit gtr [2 tyres good 60% and 2 tyres poor wear markers]

4 r32 gtr genuine wheels and tyres 700.00 [4 tyres good 40%]

Greddy e01 boost controller complete $450.00

PLUS POSTAGE OR FREIGHT COST

Thanks for looking i check my messager twice a day or you can sms me on 0409135950.

Hey mate, Do u still hav the front diff of that GTR

If so r u willing to part with it and how much??

  • 3 weeks later...
This was a complete r32 gtr 1990 model red,took it to have some small body repaires done and found rear railes rusted out to dangerious to keep driving so i am wrecking.

I advertised in tassy first as that is where car is,freight around aust is very resonable.

Already sold some parts listed below

front bar and reo

radiator and grill

front and rear seats

passenger door

abs unit

some interior parts

The rest or the car is for sale.this car was driving around 4 weeks ago.

Engine complete with everything,computer,loom,afm,air pods,clutch,gear box,fuel pump,turbo's I mean everything just put into car power up and drive away.$5000.00 plus freight and i will organise for buyer.

Complete brake system 4xdrilled disc's and 2x front calipers and 2x rear calipers,brake pads for both and fluid lines.$600.00

4 Nismo lmgt2 17 x 9.5 light weight wheels cw tyres to suit gtr [2 tyres good 60% and 2 tyres poor wear markers]

4 r32 gtr genuine wheels and tyres 700.00 [4 tyres good 40%]

Greddy e01 boost controller complete $450.00

PLUS POSTAGE OR FREIGHT COST

Thanks for looking i check my messager twice a day or you can sms me on 0409135950.

how much for front bar and reoand also rear quater glass surrounds both sides

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...