Jump to content
SAU Community

Recommended Posts

Hey guys I just installed a vee port turbosmart bov, and now my car has more flooder than a vl haha nar serious why does it do it so hard?

The othe thing is that there mild back fire on the mid range boost, however on full boost it's fine.

I have it currently on the softess setting, should tighten it? Cause really I don't to be sounding like the biggest stutututu out there plus the backfire is a worry?

Link to comment
https://www.sau.com.au/forums/topic/267255-bov-recently-installed/
Share on other sites

did you get instructions with the bov, It should enplane all that in there, Mine is a gfb gt hybrid and according to the instructions

you should undo the adjustment screw one full turn, and keep doing that till it stops.

ok guys problem solved, all i did was tighten up the BOV. It stopped floddering like crazy and backfire is now gone. Tomorrow i will take it for a proper drive on full boost to confirm.

Btw if the BOV is on too tight is that bad??

I don't mean to question your, but can you shine some light on this. It's adjustable tention in the spring, so higher pressure aka boost would require more tention otherwise the valve would be opening to early? If it's too tight, the valve isn't ofening enough???

Come on guys so many people with bov and no answers? Should I wind it up all the way?

Peter,

What makes you 'entitled' to an answer?

The reason no-one has answered you could be one or all of the following reasons:

1. Your BOV is an vent to atmosphere BOV. The skyline ECU is not designed to cope with vent to atmosphere and will overfuel on gear changes. This has been covered 100's of times on these forums. Every 2-3 days someone asks this question...The same f*&^in question. Do a search!!

2. Many people hate atmo BOVs. All they do is attract attention.There is no benefit apart from pure rice factor..As if imports don't get too much attention already..Now, every cop think any BOV is illegal...We can't help that they don't understand the difference between legal and illegal BOVs...Fact is, thanks to the atmo BOVs we are even further behind the 8-ball and guilty until proven innocent...ie trying to convince the cop that unlike most other atmo rice sounding BOV cars on the road, mine is actually legal cause it is plumbed back. Too complicated for your average HWP officer...

3. Turbosmart gear comes with good instructions that cover your exact question...

Not trying to be harsh, just explaining why no-one answered...

Mate, the reason your car was fluttering wasn't because your BOV was too loose, it was because it was too tight.

You probably loosened it, and now it is able to expel the air, rather than the pressure going back through your turbo.

Be careful but, having it too loose may expose it to leaking under boost (that's if you got it way loose), however, having it too tight will cause compression surge i.e. flutter.

Peter,

What makes you 'entitled' to an answer?

The reason no-one has answered you could be one or all of the following reasons:

1. Your BOV is an vent to atmosphere BOV. The skyline ECU is not designed to cope with vent to atmosphere and will overfuel on gear changes. This has been covered 100's of times on these forums. Every 2-3 days someone asks this question...The same f*&^in question. Do a search!!

2. Many people hate atmo BOVs. All they do is attract attention.There is no benefit apart from pure rice factor..As if imports don't get too much attention already..Now, every cop think any BOV is illegal...We can't help that they don't understand the difference between legal and illegal BOVs...Fact is, thanks to the atmo BOVs we are even further behind the 8-ball and guilty until proven innocent...ie trying to convince the cop that unlike most other atmo rice sounding BOV cars on the road, mine is actually legal cause it is plumbed back. Too complicated for your average HWP officer...

3. Turbosmart gear comes with good instructions that cover your exact question...

Not trying to be harsh, just explaining why no-one answered...

Yer look stress, point taken about the search part.

But a BOV reduces back pressure on the turbo so there is a point if the car is boosted well over stock?

Mate, the reason your car was fluttering wasn't because your BOV was too loose, it was because it was too tight.

You probably loosened it, and now it is able to expel the air, rather than the pressure going back through your turbo.

Be careful but, having it too loose may expose it to leaking under boost (that's if you got it way loose), however, having it too tight will cause compression surge i.e. flutter.

Well thats wat i thought too, it was set to the softest setting. Once i thightened it up, the problem was sloved. Still need to double check cause it was too wet last night to drive it properly

Well thats wat i thought too, it was set to the softest setting. Once i thightened it up, the problem was sloved. Still need to double check cause it was too wet last night to drive it properly

In that case, make sure that your vaccum hose actually has vaccum. Also, open you BOV (i.e. untwist it until the spring pops out, and lube the inside up with grease to ensure the valve can open and close smoothly.

Your car should not be fluttering with a soft spring on the BOV, something is wrong.

Yer look stress, point taken about the search part.

But a BOV reduces back pressure on the turbo so there is a point if the car is boosted well over stock?

It is designed to prevent compressor surge = When the air goes back into the turbo and forces the turbine blades to spin the other way, which gives you that "Dose" noise.

That's not good for your turbo.

A stock GTR BOV can handle up to 300+ kW's running 1.2 Bar boost (17.4 Psi) easy...

It is designed to prevent compressor surge = When the air goes back into the turbo and forces the turbine blades to spin the other way, which gives you that "Dose" noise.

That's not good for your turbo.

A stock GTR BOV can handle up to 300+ kW's running 1.2 Bar boost (17.4 Psi) easy...

It doesn't actually make the blades spin the other way mate.

It is merely pressurised air passing through fast spining fins. There is no way 7 PSI could make blades that spin at over 10,000rpm spin the other way.

It doesn't actually make the blades spin the other way mate.

It is merely pressurised air passing through fast spining fins. There is no way 7 PSI could make blades that spin at over 10,000rpm spin the other way.

Yeah for sure...

Thanks. :P

I just wanted to point out the fact that not having a BOV is bad for a turbo car and he could have stuck with his stock one OR I should have said upgrade to a GTR one.

Yer look stress, point taken about the search part.

But a BOV reduces back pressure on the turbo so there is a point if the car is boosted well over stock?

Peter,

You have misinterpreted my response. I am all for BOVs. They have a purpose irrespective of much boost you are running. Nissan didn't put the stock one on just cos they felt like it.

I was pointing out the problems with atmo venting BOVs. Plumbed back BOVs are perfectly fine. There are many brands available which can be plumbed back...even Turbosmart...

yer look i understant where you are coming from!!! but i got a bit bored of the the basic mods on it, i doubt that i'm gonna keep it on for long but its fun. Since i bought it on a week ago a already got a few other bits and pieces to make it quicker. Just a really fun car

Thanks for your input

Peter,

You have misinterpreted my response. I am all for BOVs. They have a purpose irrespective of much boost you are running. Nissan didn't put the stock one on just cos they felt like it.

I was pointing out the problems with atmo venting BOVs. Plumbed back BOVs are perfectly fine. There are many brands available which can be plumbed back...even Turbosmart...

The main reason nissan put on a plumb back bov was to meet emmisions standards. I run an atmo bov. Yes some cars react badly to them and some dont. Its strange but its true. Had one r33 that you couldnt drive with an atmo bov cuz it would just stall all the time. Got one on my current R33 and i have had no problems with it and its been over a year now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...