Jump to content
SAU Community

Recommended Posts

Hey all,

quick question.

The middle muffler / resonator part in the middle of the stock system, is it just a noise reducer or drone reducer or what?

Will removing it make the exhaust louder? I do have a after market muffler but it could be that tiny bit louder. Its deep but needs an extra kick.

Or will it stuff with epa if i take it out etc etc

Thanks all.

Edited by V35 Matt

i wanted to get the same thing done, and had the same view about the noise....it does make a difference from the couple of 350z vids ive seen on youtube.

Yes it is only a resonator...and btw whats epa?

Hey all,

quick question.

The middle muffler / resonator part in the middle of the stock system, is it just a noise reducer or drone reducer or what?

Will removing it make the exhaust louder? I do have a after market muffler but it could be that tiny bit louder. Its deep but needs an extra kick.

Or will it stuff with epa if i take it out etc etc

Thanks all.

Just a resonator.

Cat converters affect EPA.

So how much will it increase flow without it? and how much louder will it get?

I dont want stupid loud, just enough rumble.

I doubt there would be any kind of meaningful flow increase.

Put it this way, my Fujitsubo Legalis 3" exhaust has a resonator on it in a similar style, and that thing flooooooowwwwwwssssss.

It has more to do the size and design of the pipe than having a resonator.

Would be a bit louder than stock. Don't think it would be enough to fail a noise test though.

Why not just have a larger rear muffler installed?

Or even just a larger tail pipe.

Edited by iamhe77

I asked Midas about it, and they said that the main muffler down the back is so large that removing the mid muffler wont be a huge difference, or maybe not a difference at all....but im thinking, nissan did put it there cuz maybe the stock rear muffler wasn't cutting it. Not that im saying it was a last minute bolt on, just my theory on it.

the resonators on my car are gone

car sounds a bit raspier at higher revs

normal driving no difference

so BLISTIC your running the stock system without the resonator?

I had a look on this thread and they were talking about the exhaust components on a 350z...and said "The OEM Mid pipe consists of 60mm mild steel piping with several mild bends and curves. There is a short resonator muffler near the Y Pipe end which some 350Z owners have chosen to remove claiming performance gains and a more aggressive exhaust note"

http://www.350z-tech.com/zwiki/Exhaust_system_overview

I had a look on this thread and they were talking about the exhaust components on a 350z...and said "The OEM Mid pipe consists of 60mm mild steel piping with several mild bends and curves. There is a short resonator muffler near the Y Pipe end which some 350Z owners have chosen to remove claiming performance gains and a more aggressive exhaust note"

http://www.350z-tech.com/zwiki/Exhaust_system_overview

that is basically what i have done

i dont know about performance gains cos i dynoed it at 177.1rwkw seems about right

just the exhaust note when you floor it, sounds a bit better.

You will find that the resonators that fujitsubo use are simply "straight thru" cans. e.g, theres nothing really in them.

That's right.. well mostly.

As you can see, one of the "cans" is blanked which I presume aids in reducing the noise considerably.

FujitsuboLegalisR.jpg

Why would you want something in them?

Turbo + high flowing Exhaust = :wub:

I was offered a "high flowing" custom exhaust for my car, but to keep the sound down, he would pack the muffler with steel wool.

I would imagine this would eliminate the "high flowing" capabilities of the unit!

cutting out the resonator n putting a straight pip thru is like 40-60 bux at an exhaust shop. you shouldnt go wrong. ive done it to my s2000 and it get throatier sound, thats it. cant really go wrong for $50. you can always weld the resonator back in if you wanted to.

the difference would be audible only, power wont change from this...

the illusion of power being that of a slightly higher exhaust note is all **UNLESS** you had an aftermarket exhaust on and the resinator was actually restricting things...

sounds stupid, but does happen on a lot of imports, last car I bought and brought over, pulled the resinator out, and it was a 3" pipe / resinator

but on further inspection the 3" resinator was hollow and had a 2" resinator welded into it... hard to explain and i've lost the pics... in that instance

removing it = more power

:D

I might be interested in trying this though, for $50 etc, you know when you stick it to these cars they get a little throaty, for purely wank factor

little bit more of a throaty sound never hurt anyone :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...