Jump to content
SAU Community

Recommended Posts

  • 3 months later...

I'm biased, but I like XD9's

My car:

5887567232_dd75cae8d3_b.jpg

5886982719_426fbab819_b.jpg

5887032521_bf4d91009f_b.jpg

Hey looks good, what size/offset do you have on your car?

and what sort of gaurd work was done?

Edited by MatthewT85
  • 2 weeks later...

Where were people getting the buddyclub p1 rims in 18" from, preferably matte black?

I can seem to find any retailers online that sell them.

There is the rota boost rims which are the same design and cheaper but I would like legit p1s if I can get them.

staggered set of enkei rfp1's

check out this car. looks pure dope, colour, offset and everything. im seriously considering enkeis after these shots.

http://www.stancenation.com/2011/02/21/teenage-dream/

YES! its stance nation, not all threads on there are tooooooo bad. its not like its an EG civic with 18x10s etc, i dont need to seeee anymore of those things. yock!

staggered set of enkei rfp1's

check out this car. looks pure dope, colour, offset and everything. im seriously considering enkeis after these shots.

http://www.stancenation.com/2011/02/21/teenage-dream/

YES! its stance nation, not all threads on there are tooooooo bad. its not like its an EG civic with 18x10s etc, i dont need to seeee anymore of those things. yock!

Blags's car

ok i know this is the wrong section but getting no luck anywhere else -

My question is , will these rims fit on my stock r33 skyline series 2. I know I probably need to get the fenders rolled but other then that , will I have issues with fitment for the rear?

They are Volk SF Challenge Zero's , old school volk wheel , came out in 97'

Front :

18x9.0 +45 235 tyres

235offset.jpg

Rear:

18x10.0 +48 275 tyres

offset275.jpg

cheers

GTR wheels are 9" +30 all round from memory and they fit on gtst's without any work im pretty sure

So, 9" at the front should be ok with a 235 tyre, thats a real high off set though.

Not real sure on the 10" on the rear, I have only really seen 9.5" on the back.

IMO With those offsets, they arent going to look great if they do fit, unless you run spacers.

Edited by Mitcho_7

To get an idea of what they'll be like, the car at the top of this page with the XD9's has (I assume) 18x10" +18 on the rear. So your wheels will sit 30mm further in than those. I had the same and they poked out about 5mm so +48 will be fairly sunken.

Put them on and see what you think anyway. I have a feeling though you may not have enough inner clearance with those offsets.

GTR wheels are 9" +30 all round from memory and they fit on gtst's without any work im pretty sure

So, 9" at the front should be ok with a 235 tyre, thats a real high off set though.

Not real sure on the 10" on the rear, I have only really seen 9.5" on the back.

IMO With those offsets, they arent going to look great if they do fit, unless you run spacers.

To get an idea of what they'll be like, the car at the top of this page with the XD9's has (I assume) 18x10" +18 on the rear. So your wheels will sit 30mm further in than those. I had the same and they poked out about 5mm so +48 will be fairly sunken.

Put them on and see what you think anyway. I have a feeling though you may not have enough inner clearance with those offsets.

thanks for the advice , il fit it tomorrow and see how they sit.will post pics when they are on

oh and sorry for the thread jack

cheers

To get an idea of what they'll be like, the car at the top of this page with the XD9's has (I assume) 18x10" +18 on the rear. So your wheels will sit 30mm further in than those. I had the same and they poked out about 5mm so +48 will be fairly sunken.

Put them on and see what you think anyway. I have a feeling though you may not have enough inner clearance with those offsets.

so they didnt fit , as suggested no inner clearance at all , what kind of spaces would I need?where would i buy it from?

oh and my vote goes for the professors! beautiful looking wheel

so they didnt fit , as suggested no inner clearance at all , what kind of spaces would I need?where would i buy it from?

oh and my vote goes for the professors! beautiful looking wheel

I'd say if you wanna go spacers you'll need 25mm bolt ons front and back. Never used spacers before so not sure where you'd get them, Justjap maybe? Best let someone else reply who'd know better for wheel studs etc.

With 25mm you'd technically be on +23 offset rear and +20 front. Will be fairly flush then if you consider my post just above yours in reply to the quoted pic. You'd be 2mm more outwards on the front and 5mm inwards on the rear compared to that black R33.

I'd say if you wanna go spacers you'll need 25mm bolt ons front and back. Never used spacers before so not sure where you'd get them, Justjap maybe? Best let someone else reply who'd know better for wheel studs etc.

With 25mm you'd technically be on +23 offset rear and +20 front. Will be fairly flush then if you consider my post just above yours in reply to the quoted pic. You'd be 2mm more outwards on the front and 5mm inwards on the rear compared to that black R33.

thanks for the advice, found some :

http://www.ebay.com.au/itm/NEOTECH-NISSAN-5-Stud-114-3-25mm-Bolt-Wheel-Spacers-/130708637330?pt=AU_Car_Parts_Accessories&hash=item1e6ed78692

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...