Jump to content
SAU Community

Dyno Day - Aussie Vs Imports - Springy Motors - Sat 27th Of June 2009, Need Some Nissan Cars To Represent!

Dush

By Dush,
in Archived Events

 Share

Recommended Posts

Dush Mentor

Dush

Posted
Posted

Dyno Day - Aussie VS Imports - Springy Motors

(Street cars only)

Limited to 20 cars.

10 of each side.

Time start: 11:00

Date: SAT 27th of June 2009

Location: 58 Smith Road, Springvale, VIC

Phone: (03) 9546 8777

Cost: $65.00

All entries will require authorisation to participate.

All entries are required to prepay by the 15th of June 2009

All entries must be street registered.

How it will work:

All cars will be ready at Springy Motors by 11:00.

They will take turns running on the dyno.

A total will be calculated by the end of the day.

The highest all wheel kw will be given the win.

The winning participants will all get a trophy.

pm myself or email bazeng @ hotmail . com or call Springy Motors.

It will be a friendly event. BBQ provided for lunch.

Spectators welcome!

DVD will be made during the event.

All entrants will receive a copy of the DVD.

Spectators can retrieve a copy of past Dyno Day DVD's free.

Dush Mentor

Dush

Posted
  • Author
Posted

Should be a good event! Bit worried about them XR6T.. all u need is a Exhaust and flash tune and ur making 300kw @ wheels...

We need some Nissan's to go over and represent!

WARLORD BAS Collaborator

WARLORD BAS

Posted
Posted

yeh sad to say but the aussie cars will be pretty dominate on the dyno, on the track etc its a different story, but this isnt the track and its a dyno so unfortunately it'll be pretty hard to beat the aussie crew

Downforce Grand Master

Downforce

Posted
Posted

I wont be entering.... my car isn't making 400kw Jamie :P but I would expect to see some big numbers from XR6 turbos with remapped ECU's + injectors, or any turbo LS1, etc. at a dyno event like this

shepo Experienced

shepo

Posted
Posted

what we need to do is find people out there who have done LS1 (or similar) coversions to their skylines and silvias, then we are in with a shot... :)

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
You haven't seen the big V8s and the XR6s haven't you? :)

LOL!

Straight line power house dyno queens. :D

I wont be entering.... my car isn't making 400kw Jamie :) but I would expect to see some big numbers from XR6 turbos with remapped ECU's + injectors, or any turbo LS1, etc. at a dyno event like this

You have prof, I have seen it.

what we need to do is find people out there who have done LS1 (or similar) coversions to their skylines and silvias, then we are in with a shot... :D

LS1 in a Skyline... There is a thread about that... Not very good feed back from some members on here.

some_cs_student Veteran

some_cs_student

Posted
Posted
Wouldn't Imports answer to xr6 turbos be Supra TT's

I don't think so, have you seen any XR6 forums recently? While many members seem to say they can make "400kw from 5K of mods" there are those who are actually doing that without much of a problem.

I don't believe the 5K figure, but they do seem to do quite well with power mods...

And then there will be people with a turbo-charged V8's or similar.

$65 for the dyno seems pretty expensive, might come down to watch....

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

lol, the one good thing about these days are the ausie v8 muppets that think that they will dominate all jap cars because they have a falcodore v8 with an exhaust, and then pull like 240rwkw and blame it on the dyno - sighting the 317 badge on the back of their car as "evidence"

but the aussies will win.... as they say "there is no replacement for displacement"

ujin Community Regular

ujin

Posted
Posted

5k for 400kw! thats cheating! any 400kw skylines around? i m sure there are

I don't think so, have you seen any XR6 forums recently? While many members seem to say they can make "400kw from 5K of mods" there are those who are actually doing that without much of a problem.

I don't believe the 5K figure, but they do seem to do quite well with power mods...

And then there will be people with a turbo-charged V8's or similar.

$65 for the dyno seems pretty expensive, might come down to watch....

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • nash47
      Cas issue

      By nash47 · Posted

      Did and sync timing with light 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...