Jump to content
SAU Community

Recommended Posts

hey guys,

Giving the car a good ol' detail the other day and while I'm washing I get to the rear wheel wells, and notice at the back of the

sideskirt where you would imagine a mudflap to located, that general area, there is a small black plastic cover/casing that seems

to serve no purpose other than to hold up to the last 6months of driving worth of dirt / glass / bits n pieces of whatever you ever

drive over and from wherever.

I didnt try get under the car to remove it, but there seems to be no hole so it doesnt act as a drain, its literally just there for what

seems to me, to catch dirt and make my cleaning job longer than what I had anticipated due to the amount of dirt that came out

of it.

Anyone able to shed some light on what this might actually be there for ?

You can almost bend it 120degree's to try remove the dirt it holds, and it wont snap or break and will just go straight back to its

original position also.

Be interesting to see what other people say/ think or even knew if it was there..

time is limiting factor here with photos unfortunately, that and the fact it would be all black on black if I took something..

quite simple really... go to the rear wheel well of your car, you can see where the side skirt finishes, put your hand inside the wheel well

right behind the skirt and you will feel this big black plastic cover that is open at the top..

you can stick your fingers into the hole it creates, then you realise you can bend it back and all of a sudden you notice all the dirt n crap

it holds in it....

how would that work?

I didn't remember seeing anything around the door jamb when the doors were opened that could indicate some path of air to escape if that's to equalise the pressure...

maybe just a bad design, and they decided to put a plastic cover on top to reduce the whole crap load of sh1t it would have collected without the cover?

how would that work?

I didn't remember seeing anything around the door jamb when the doors were opened that could indicate some path of air to escape if that's to equalise the pressure...

Not necessarily from the door jam. Some cars have them so when you close the doors, the cabin pressure that builds up when you close the door is released through a vent at the rear, enabling the door to be closed easier.

Might not be the case for this, but a possibility.

Boods.

  • 2 weeks later...

Is it behind the wheel? Almost like a L-shape when viewed from side on (a vertical piece, with a flat horizontal tray) where the horizontal bit is a quarter circle?

There'll be one on either side of the car, but have different shapes.

Edited by scathing
Is it behind the wheel? Almost like a L-shape when viewed from side on (a vertical piece, with a flat horizontal tray) where the horizontal bit is a quarter circle?

There'll be one on either side of the car, but have different shapes.

you still have not helped us solve the mystery... what does it do!?

Is it behind the wheel? Almost like a L-shape when viewed from side on (a vertical piece, with a flat horizontal tray) where the horizontal bit is a quarter circle?

There'll be one on either side of the car, but have different shapes.

yeah thats it, no idea wtf it does or why it there though

you still have not helped us solve the mystery... what does it do!?

Just making sure I'm talking about the right thing first. :(

yeah thats it, no idea wtf it does or why it there though

It is probably the OEM rear diffusers. They smooth the airflow leaving the rear wheel well.

On the Australian delivered 350Z, it's standard on the Track and optional on the Touring (I ended up picking up a set for my Touring from the USA). Apparently the Touring has a Cd of 0.30, and the Track (with a small chin spoiler, rear bootlid spoiler, and these rear diffusers) drop the Cd to 0.29.

When I spoke to Pro Concept about it they told me they took theirs off their race car. Like you, Josh said the only thing they were good for is collecting dirt whenever they came off the track. If it takes those 3 items above to drop the drag co-efficient by only 0.01, taking them off will probably do sweet f**k all.

Edited by scathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...