Jump to content
SAU Community

Recommended Posts

Hey all. Can someone please tell me what fluid i am best to put in my attessa system? I checked the reservoir on the weekend and its on the minimum line so i thought i better do something about it as the workshop that services my car havent checked it. Also do i have to bleed the whole system or can i just top it up? Any help is appreciated

Cheers Brad

Link to comment
https://www.sau.com.au/forums/topic/268442-attessa/
Share on other sites

if it was me i would drain the lot, prob original nissan fluid in there. Recommended fluid is any Nissan matic-D ATF fluid, such as Transmax Z or Nissans own. But i am sure many people just use a Dexron III ATF fluid, although I wouldnt. once you have filled it, idle the car, check reservoir level, top up, connect clear hose to bleed nipple and release any air bubbles, again whilst it is running.

Link to comment
https://www.sau.com.au/forums/topic/268442-attessa/#findComment-4574343
Share on other sites

and dont forget that there are 2 bleed points (in the C34 - NFI about the M35) one at the pump above the rear diff and another at the actuator at the back of the transfer case.

Link to comment
https://www.sau.com.au/forums/topic/268442-attessa/#findComment-4576649
Share on other sites

ive got a 97 rs4 and the oil in the back hatch area is seperate from the oil for the transfer case. the oil from the hatch area activates a piston type setup which engages the awd. the transfer case at the end of the gearbox has a drain and filler plug in them. thats where the gearbox puts power to the front driveshaft. the oil from the hatch area was fine on mine and the transfer case oil was all burnt and black. that caused a shudder when the awd was under load. for the transfer case i used castrol transmatic z. for the hatch area i am unsure what oil to use. all i know is that it is very thin.

Link to comment
https://www.sau.com.au/forums/topic/268442-attessa/#findComment-4577815
Share on other sites

ive got a 97 rs4 and the oil in the back hatch area is seperate from the oil for the transfer case. the oil from the hatch area activates a piston type setup which engages the awd. the transfer case at the end of the gearbox has a drain and filler plug in them. thats where the gearbox puts power to the front driveshaft. the oil from the hatch area was fine on mine and the transfer case oil was all burnt and black. that caused a shudder when the awd was under load. for the transfer case i used castrol transmatic z. for the hatch area i am unsure what oil to use. all i know is that it is very thin.
Yes the transfer case has its own oil supply but the nipple right at the end of the gear box extension near the hose that goes to the attessa on top of the diff is for the Atessa not for the transfer case oil. Filling is via the reservoir in the boot and both bleed nipples are for the Atessa. The fluid for the Atessa is officially Nissan's specially expensive power steering fluid but i use a semi-synthetic automatic transmission fluid. So you can go to Nissan or use any good quality atf.
Link to comment
https://www.sau.com.au/forums/topic/268442-attessa/#findComment-4578842
Share on other sites

oscillo hero Posted Yesterday, 05:44 PM ive got a 97 rs4 and the oil in the back hatch area is seperate from the oil for the transfer case. the oil from the hatch area activates a piston type setup which engages the awd. the transfer case at the end of the gearbox has a drain and filler plug in them. thats where the gearbox puts power to the front driveshaft. the oil from the hatch area was fine on mine and the transfer case oil was all burnt and black. that caused a shudder when the awd was under load. for the transfer case i used castrol transmatic z. for the hatch area i am unsure what oil to use. all i know is that it is very thin.

I have a shudder in my car under load. Im wondering if its the same thing. Not so much a shudder but a vibration in the rear at full boost. sounds like a good weekend job

Link to comment
https://www.sau.com.au/forums/topic/268442-attessa/#findComment-4580527
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...