Jump to content
SAU Community

Recommended Posts

Hay guys got a question or you i have just recently got my P's (red) i am asking if i drove my mates GTR r32 would he or i get in trouble if pulled over by the cops, with my mate sitting in the pasenger seat ?

You're asking can you dodge the law?

Have a think about what you're asking before posting.

Also, if you still think "there's a chance i can get away with it" then follow these simple steps;

1. Get your licence

2. Cut it in half

3. Stay the fu(k away from skylines so you dont stack it (even though you know you're the worlds best driver, aren't all p platers....), also the negative publicity will hurt more than just you.

:)

Hay guys got a question or you i have just recently got my P's (red) i am asking if i drove my mates GTR r32 would he or i get in trouble if pulled over by the cops, with my mate sitting in the pasenger seat ?

would you get in trouble if you were drink driving and your mate is in the passanger seat sober?

would you get in trouble if you were speeding and your mate is the owner of the car in the passanger seat?

and would you get in trouble if you wrapped the car around the pole and your mate is the owner in the passanger seat?

ABSOLOUTELY!

Edited by eeiko321

I mean would my friend get into trouble if i was caught drving his gtr ? would he get a fine or would it just be that gets in the shit with the cops ?

And also about the fine 4 driving a turbocharged car when i passed my P's i got a pamphlet/little book and in this book it tells u a bunch of stuff in a table tells that you can get a fine for and it says in this booklet that "No driving high powered vehicles such as eight cylinder cars, cars with turbocharged or supercharged petrol engines, and nominated high performance six cylinders cars.*" and it says the fine is "$227 Three demerit points" Why did that guys b4 me say i can get $1100 fine ??

Awww = ( thanks 4 the help with the question :):D guys .. aww im sad i want a skyline so bad it hurts !! realy it do ! cuz i wanna deal up some :) and :blush: u guys gonna say im noob and ima gonna hit a pole n stuff but i cant help how i feal skylines are like a hot chick u know there dangerous but u cant help wanting her. thanks again ! 4 ur time spent replying 2 my post

cheers

I mean would my friend get into trouble if i was caught drving his gtr ? would he get a fine or would it just be that gets in the shit with the cops ?

And also about the fine 4 driving a turbocharged car when i passed my P's i got a pamphlet/little book and in this book it tells u a bunch of stuff in a table tells that you can get a fine for and it says in this booklet that "No driving high powered vehicles such as eight cylinder cars, cars with turbocharged or supercharged petrol engines, and nominated high performance six cylinders cars.*" and it says the fine is "$227 Three demerit points" Why did that guys b4 me say i can get $1100 fine ??

Awww = ( thanks 4 the help with the question :D:) guys .. aww im sad i want a skyline so bad it hurts !! realy it do ! cuz i wanna deal up some :) and :spank: u guys gonna say im noob and ima gonna hit a pole n stuff but i cant help how i feal skylines are like a hot chick u know there dangerous but u cant help wanting her. thanks again ! 4 ur time spent replying 2 my post

cheers

lol My friend... from what i read...The way you think is evidently shows that you must be VERY, young....

well if the pamphlet clearly says you are not allowed then why are you nominating yourself to drive this car? and then worry about him getting in trouble and not yourself?!

as for your question, at this point....im pretty sure you cop the fine.....your friend walks free.

but they were actually looking into charging the owner of the vehicles whom lend thier cars out to people whom are not legally allowed to drive the certain vehicles.

because too many young people were buying high performance cars and registering it under thier parents names etc to make it less obvious.

yep, copz are really cracking down on this shit.... seriously you better watch out...

and it says the fine is "$227 Three demerit points" Why did that guys b4 me say i can get $1100 fine ??

Penalties

From 1 July 2007, the penalty for driving a high powered vehicle will be three demerit points and a maximum fine of approximately $1100. These penalties will apply to both the current power to weight restrictions and the new high powered vehicles restrictions.

http://www.arrivealive.vic.gov.au/initiati...pply_if_yo.html

Edited by willL
Sigh. My "not all p platers are idiot drivers" campaign is going horribly. thanks mate.

Not all are but a vast majority are. At least we only have to be on p plates for 3 years. Then you can disassociate yourself from all the idiots :P

If your mate is letting you drive his GTR he is as thick as two boards.

Two things you never lend to your mates... you car and your women. Because they will f**k your car and f**k your woman!

That was the advice I was given by a family elder, haha.

OP: you can drive a GT-R on your L's :D

Yeah good advice RE driving mates cars, I had a mate blame me for clutch wreckage in his LS1 and I blamed him for teh slipping auto in my VN, from driving each others cars. Not to mention if there's any kind of crash...

You have a better chance of not putting up the P plates and driving without them, that way if you dont attract too much attention from the po po, but if you get caught/pulled over your gonna get busted up badly regardless of having you p plates displayed or not.

Last R32 GT-R P plater i saw was over a year or so back on Green's and got screwed over so hard by the high way patrol it wasnt funny...think he even lost his licence when i asked him what was happening.

You can get away with it, its not like cops go hey lets look for p platers in GT-R's...but then again if your at a set of lights and they see you or you happen to be in the wrong place at the wrong time be prepared for the worst...

Sigh. My "not all p platers are idiot drivers" campaign is going horribly. thanks mate.

not every single one of them...... but statistics have shown that MOST are.......

why do you think these restrictions took place?... they didnt do it for the love of god you know...

theres a reason for everything

no matter what anyone says...either way P-platers lack the experience on the roads.. and its not a good mix with an unexperienced driver with a high powered car, end of story.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...