Jump to content
SAU Community

Recommended Posts

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

So you are entering in the dyno comp then paul..... Hmmm maybe i might have to enter ole Sly then aswell ...well if you guys are rockin up to move your cars past all the other bloody show cars AND THEN onto the dyno pack dyno i will prob see you on the dyno hmmmm say about 2pm, mine will prob be on there then at 4. That dyno is really accurate and all but honestly why would it be allowed in show use with 40 cars in line, to swap a s15 silvia to a 180 sx today timed a bit more than 25 mins, dunno whether or not they where takin it easy but the crowd didn't like it and half went away. I have no doubt these dyno packs are awesome for reading but as i have now seen are quite time consuming, plus possibilities of wheels getting damaged and not too mentioned not being put on tight enough.... if you had changed 200 or so wheels in one day i know i couldn't be stuffed tightening them all up properly *mental note to you all, never let me tighten your wheels*:( :bahaha:

Good showing everybody.

Was nice to put a few more faces to names (or nicknames). Congrats Paul on not blowing up your engine and bettering your dyno with a 431HP. Sensational. Shirts are good too. Quite a few Skylines which is great, couple of lovely GTRs....mmm...

Originally posted by 25GTT

That dyno is really accurate and all but honestly why would it be allowed in show use with 40 cars in line, to swap a s15 silvia to a 180 sx today timed a bit more than 25 mins, dunno whether or not they where takin it easy but the crowd didn't like it and half went away. I have no doubt these dyno packs are awesome for reading but as i have now seen are quite time consuming, plus possibilities of wheels getting damaged and not too mentioned not being put on tight enough.... if you had changed 200 or so wheels in one day i know i couldn't be stuffed tightening them all up properly *mental note to you all, never let me tighten your wheels*:P :bahaha:

For starters we use torque wrenches on all wheel nuts, every single nut across the 34 cars we dyno'ed over 2 days have their nuts done up to the same safe level. We are extremely mindful of such concerns about wheel damage etc.. Why do you think we dont use rattle guns? We've got em, dont use em on street cars.

Secondly your time concerns, yes there were a few cars that took longer than others, the 4wds obviously. As far as whether the crowd liked it or not, we didnt give a shit. We were doing our job as quickly and reliably as possible, or do you want us to drop wheels on their face on bitumen? A GTR today had to be taken off the dyno after being completely bolted up due to its body kit being too wide and the risk of damage to the car was considered too high.

But i guess you think we should have run it anyway, cracked the sideskirt off, just to please the crowd, so we didnt waste any of their precious minutes.

Red17

Originally posted by red17

But i guess you think we should have run it anyway, cracked the sideskirt off, just to please the crowd, so we didnt waste any of their precious minutes.  

Red17

Points taken red 17, in no way did i say that you guys did a bad job at all, in my post i also said the dyno has been praised as being quite an accurate dyno, however we must keep in mind that th show wouldn't be the show without the crowd. you guys did do a fantastic job and i have no doubt that you guys have excelled more than what most people have done or what i could do, changing those wheels would be annoying and for you guys to stick with it all day was well done.

My point however is that although the dyno is accurate the problems with it is time consumption and now as shown the problem with putting cars on with wider body kits, of course i would rather the GTR not go on there but this is an advantage that a normal dyno would have had. It's unfortunate that we can't say stuff the crowd as half of the SAU guys on here are "the crowd" we have to give a shit about them as they are the ones that have paid $15 entry to look at cars and without the crowd the show is not a show.

Anyways - you did a good job dude and now that you mention it I am bloody glad no rattle guns were used especially with what happened to one of my old mags a few years back!

I think Ivan and the APA guys did a great job, yes it does take a long time, but they worked there asses off, and if people weren't so precious about having the cars shown on Sunday arvo then they would have done even more cars.

Even the DD dyno's won't necessarily be able to handle really slammed cars:(

BTW, special thanks to Ivan for not blowing up my car:D

Thanks for the praise fellaz, i should apologise for my tone in my original post. Id just gotten in from PAS and the APA team had been severely chastised by a certain person on a certain trade stand for quote "running a dyno comp nobody ****ing wants".

So suffice to say I was not in a good mood.

Red17

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...