Jump to content
SAU Community

Recommended Posts

Clearly I'm not the most mechanically savvy member, but I am learning. Anyway, can a turbo timer be put on a NA car?

Reason I ask is cause I'm looking at what the owner claims to be a "non turbo" Supra with one installed.

I guess it's just a little electrical device that keeps the engine running a few minutes longer? Does it serve a purpose at all on a NA car, or it just for the wank factor?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/269091-maybe-a-really-dumb-question-but/
Share on other sites

Wank factor X 11tybillion. it is used on turbo cars to cool the turbo down from the high temp exhaust gases made at high rpms... helps with keeping longevity of turbo by letting bearings cool, oil be drained properly.... blah blah.... all that sorta stuff.... not really needed on stock standard turbo skylines unless absolutely flogged....... just keeping the key in the ignition for a min or two does the same trick.... for those rare occasions you would fang it that hard...

u can still put one on any car though...

the only reason... the ONLY reason.... (apart from wank factor) I could think why he put it on an n/a supra is because he fangs it really hard at the track regularly and cant be bothered letting his car cool... if that was the case... car = thrashed = don't touch it anyway...

Unless the engine is highly modified...

Or it gets a good "thrashing"...

The turbo timer on a N/A is just for a peace of mind to allow then engine switch off at a cooler temp, like what WYTSKY said.

If I've been driving my car quite hard (which I very rarely do) - like through the twisties, I just ease right off just before the destination, but if forced to stop, I just let the engine idle for around 30 sec (turbo timer is just a waste of money if you really don't need one - that money you save by not having one goes to the fuel you burn cooling your engine down).

I'm a firm believer you should always warm down the engine after a hard run or hot day because heat soak shortens the life of some components - for stock cars 30 sec is long enough.

Just my 2c

  • 2 weeks later...

if this is a white n/a supra your talking about and by coincedence its the same supra im thinkn of tht has a turbo timer one of my mates yes it gets driven very very very hard i have got no clue how it is still running

id go 2 this blokes house and haras the crap outa him...

:D

i agree its a bad option if the dude with an NA has one "because he drives it hard 24/7 and needs it to cool"

id steer clear of that one bud

I've got a turbo timer in my NA car, but it's integrated into the security system and didn't cost that much extra. If I ever remove the alarm, it'll be a selling point.

Electronically, though, there's nothing stopping you putting it on any internal combustion engined vehicle.

On the street I turn the car straight off anyway, but when I'm at the track I use it to idle down and cool the fluids that extra minute while I've walked off with my keys.

simple answer is yes.

but there is no point. even on a turbo car they aren't the best idea (good yes, but there are much better alternatives), for various reasons. the simple fact is that your car will cool down more when moving. also you are cooling down your brakes, etc when moving and not letting it sit there with hot brake pads in the 1 spot on the rotor. if you do thrash your car you are better off doing a lap round the block driving like a grandpa than just pulling up and running the turbo timer for a minute or 2.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...