Jump to content
SAU Community

Recommended Posts

Hey All,

So after a 3 month wait I finally got my wheels last night. Took them to Jax at Browns Plains to get fitted. All fitted up no dramas or scrubbing anywhere. Despite arguments with the tyre fitter there. He thought they were going to scrub on one of the suspension arms. 1 more reason not to believe anything they say I spose.

Anyway here's some pics. Before and after :D

DSCN1325.jpg

DSCN1321.jpg

DSCN1322.jpg

DSCN1323.jpg

DSCN1320.jpg

DSCN1314.jpg

DSCN1310.jpg

DSCN1312.jpg

DSCN1316.jpg

DSCN1318.jpg

DSCN1317.jpg

DSCN1326.jpg

DSCN1327.jpg

DSCN1333.jpg

DSCN1335.jpg

Cheers

Colin

Link to comment
https://www.sau.com.au/forums/topic/269174-new-wheels-for-my-gtr/
Share on other sites

figured it out. alarm install in japan has butchered the wiring up front. need to branch across from one headlight to the other for the main beam and opposite for the high beams. Cheap fix but i cbf stripping out the alarm to fix it properly. I'll tell you what was happening next thursday. complete mindf**k lol

Looks great!

Anymore pics showing angles of the guard clearance please?

No problem. Not the best but I'll grab some more later.

DSCN1339.jpg

DSCN1342.jpg

DSCN1343.jpg

very nice dude, about time they arrived eh?

haha they didn't even arrive. I had to pick em up myself from Brisbane lol. Was worth it though :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...