Jump to content
SAU Community

Recommended Posts

Hey All,

So after a 3 month wait I finally got my wheels last night. Took them to Jax at Browns Plains to get fitted. All fitted up no dramas or scrubbing anywhere. Despite arguments with the tyre fitter there. He thought they were going to scrub on one of the suspension arms. 1 more reason not to believe anything they say I spose.

Anyway here's some pics. Before and after :D

DSCN1325.jpg

DSCN1321.jpg

DSCN1322.jpg

DSCN1323.jpg

DSCN1320.jpg

DSCN1314.jpg

DSCN1310.jpg

DSCN1312.jpg

DSCN1316.jpg

DSCN1318.jpg

DSCN1317.jpg

DSCN1326.jpg

DSCN1327.jpg

DSCN1333.jpg

DSCN1335.jpg

Cheers

Colin

Link to comment
https://www.sau.com.au/forums/topic/269174-new-wheels-for-my-gtr/
Share on other sites

figured it out. alarm install in japan has butchered the wiring up front. need to branch across from one headlight to the other for the main beam and opposite for the high beams. Cheap fix but i cbf stripping out the alarm to fix it properly. I'll tell you what was happening next thursday. complete mindf**k lol

Looks great!

Anymore pics showing angles of the guard clearance please?

No problem. Not the best but I'll grab some more later.

DSCN1339.jpg

DSCN1342.jpg

DSCN1343.jpg

very nice dude, about time they arrived eh?

haha they didn't even arrive. I had to pick em up myself from Brisbane lol. Was worth it though :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...