Jump to content
SAU Community

Recommended Posts

High all, removed my left kick panel to install my new Power FC:D and found this. Looks like stock ECU but has a Mine's plate with serial no. on it. What does this mean?? Has it got a daughterboard or something in it? I know the stock ECU's are locked so what has been done? It will probably be up for sale in the near future once I know what it's worth

Link to comment
https://www.sau.com.au/forums/topic/26936-took-off-my-kick-panel-to-find/
Share on other sites

Score!!!

Would seriously consider putting it on a dyno (if you haven't already) to see what the AFR's are like. i.e. make sure the ecu that is installed, isn't leaning out the mix too much due to the better fuel it was prob tuned on. Either way, i'd sell it and have an ecu that more people in this country know how to tune.

Adrian

I have had the car for over 2 years now, runs sweet as. I always thought something was strange because the rev limiter doesn't cut in until around 8,000rpm or higher, and when I accidentally set my bleed valve wrong and boost went off my 20psi gauge the boost cut never cut in. Also I have the car over 220, definitely no speed cut either!! When I go to get the Power FC dyno tuned, I will make sure I get a run on this ECU first.

thats like with my car!

i found this cool little plate with IMPUL racing written on it... it had clamps and looked like it belonged somewhere in the engine bay//

i was like... cool, theres some IMPUL work on my car!

but then i looked down at the pedals and realised that it clipped perfectly over the accelerator, prolly just taken off and put in the glovebox for compiance. not sure if its meant to be for that? but it fits nicely around it, so i now have an IMPUL pedal. anywayz... i got all excited for nothing...

It'll do nicely for a few basic mods - but if you need to do anything too extravegant you'll have to send it back to Japan for repogramming.

Its better than the stock ECU, probably saves you having to buy an S-AFC, but its not the worlds greatest thing way down south.

This topic has been covered previously. May get $600 for it.

It would run lean as the mines ecu is tuned for 100+ octane jap fuel. Even if you just plug in the pfc and drive around and give it a glogging the engine check light will come on as it the base igniton and fuel maps are set for the jap fuel.

yes it would cause slight detonation but unless u know what you are listening for you wouldnt know!

I also have a mines ECU in my R32 GTST...it has no speed limiter...i got the fuel all checked out and it was running lean...but only cos the old fuel pump was stuffed...put in a new fuel pump and she doesnt run lean anymore

i always thought the car ran rich. When I bought the car, it was totally stock engine-wise, but it did have set of platinum plugs in a 7 heat range. Had the head off recently and internally the motor is very healthy. Only ever run it on 96-98 octane fuel, no booster. So all I know is that it ran the car fine in stock trim, and runs it sweet as with a full exhaust, front mount and more boost.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...