Jump to content
SAU Community

2530GT Turbo, direct fit on RB25, RB20

supra man
 Share

Recommended Posts

supra man Rising Star

supra man

Posted
Posted

HKS 2530GT Ball Bearing Turbo, only 8,000km use.

Direct fit onto any RB20 or RB25. Comes with all fittings and oil lines and nice big hi flow HKS turbo elbow. 2530GT's are proven to provide 230-240kw at the rear wheels on a RB25.

$1950 or near offer

HKS%202530%20rb20%20rb25..JPG

Link to comment
https://www.sau.com.au/forums/topic/26956-2530gt-turbo-direct-fit-on-rb25-rb20/
Share on other sites
supra man Rising Star

supra man

Posted
  • Author
Posted

rs73--->

Never too late. I have these turbos coming in from Japan all the time ( I own and run Japanese Import Parts) if you want a HKS GT2530 or even better, a HKS GT2835R, email me now.

[email protected]

Anquetil Mentor

Anquetil

Posted
Posted
Originally posted by MRK25T

I bought a HKS3530 3 days ago from a guy on these forums. Got it hooked up yesturday.

Its bloody amazing compared to my high flow, and I havent even got the powerfc tuned for the turbo yet. I recommend it highly

You mean 2530 right Mark? If so? Thats what I like to hear.

I'm saving franticlly to get one of these.

Can I ask how much you payed or PM me?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...