Jump to content
SAU Community

Recommended Posts

Im interested to purchase for my R32 GTR but would like confirmation that as per what beer baron has said are these now able to give more or less camber for really lowered cars or not etc etc.

Will place my deposit as soon as John gives thumbs up for the new arms modified as per previous post by the Baron.

Cheers,

Dave. :)

  • Replies 218
  • Created
  • Last Reply

Top Posters In This Topic

ive asked johnny for more info

he is talking about ordering half for more camber and half for less camber

i sent him an email recently so he should jump on soon

so far have 3 deposits

still need a fe more to get it over teh line

pete

0448468884

Yes will get road come track car length, and track car shorter ones to suit also. Both should have plenty of adjustment, and easy to adjust to, on the car.

Yep Baron got it covered, and you are on the job aren't you.

Also to save any confusion, these are for R32 GTS-T, GTS-4 and GTR.

so wont work on 33 gtst? ....but the title says....

very interested if can be applied to my car

^Lol you dont need them. Your geometry is fine its the 32 guys that got screwed.

cos was thinkn of running more (or is it less...i mean more negative) camber in so isnt this the part i need? just something like -3 top :S

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...