Jump to content
SAU Community

Recommended Posts

  • Replies 218
  • Created
  • Last Reply

Top Posters In This Topic

Fatz / Rob260,

When do we need to pay the final amounts? Do we pay these to UAS or through you Fatz (more cas money for ya :) )

Hi mate, not 100% sure how fatz is doing things BUT the way I run it on aus300 is money due when the parts are ready to send. The balances (plus shipping where applicable) get paid direct to UAS.

You will have to clear that up with Fatz though if you are part of his group buy.

When are the second group buy orders commencing roughly.

Won't start taking orders on these until the first batch is out the door. It's great that so many of you guys are keen but I think taking orders for a second round with the first still overdue would be asking for trouble.

  • 2 weeks later...
So what's the holdup? As I mentioned before the cotter pin is tapered, so you have to drill the tapered hole before you make the pin. At the moment the guys are waiting for the tooling to turn up so that they can drill and make the pins. The remaining labour is minimal, as in less than a day to finish the set. As soon as the tool turns up we are all good to assemble.

So how far off are we now?

Got another set up for grabs from round 1. Guy has no job and money is tight... $197.50 to whoever gets in first.

Re timeframe there is minimal work left, just a case of when the tooling turns up.

Hi mate just after those camber arms...

so 197.50?

i read there were two versions somewhere, track and street, is this the case and if so which one is this set?

so does 197.5 cover the whole lot?

PM ASAP

Fatz: PM sent last week.. still after these, paid deposit 6+ months ago, want to know how I make final payment and receive the arms.. Talk to me bitch.

well i tell you what

johnny just called and he is picking the suckers up as i type

he has requested teh last payment and shipping and he will have them shipped within the week

the list of people who have paid a deposit are:

zurlox

lotus folding

ezzo

salad

pedator

adam macbeth

chris hall?

razor 32

john camber

my gtr32

yea baby were on!

two option

call me

0448468884

you can pay me

or the prefered option is call unique autosports 96209000 and they will tell you the shipping and give you bank details

pete

Pete, I'm going to get these sent to my work. If they're being posted I can only use a PO box. If couriered then only the physical address. Which shall I quote? Also, can you confirm the total asking price and the deposit amounts? I won't go into why I don't know, I just don't......Finally please can you confirm I'm getting a 'race' set.

Thanks.

EDIT....is it $395 / 2 + $20

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...