Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • Replies 218
  • Created
  • Last Reply

Top Posters In This Topic

Would you ship to the UK? As my R32 GTR is wearing out the tyres on the outer edge which i believe is due to the toe or camber and im uncertain if the standard setup is adjustable? Therefore im hoping this can correct the problem?

  • 6 months later...
  • 2 weeks later...
  • 2 weeks later...

Righto ladies

Anyway that last group buy actually cost the supplier money so I have asked again to revise the price to make it worth his while

The last one most people were happy, some people requested additional camber (eg ability to make them shorter)

I have requested if we get 10 people that they make them slightly thicker (stronger) and for additional camber adjustment.

Please not there is only so much you can do so if you want the ultimate camber solution give me a bell (involves mods to your sub frame)

We need ten orders, price is $550

I won’t f**k everyone around buy saying they will be ready in a week. So I am going to say once we have ten orders it will be three months

If it turns out quicker then so be it, I may also put up new group buy thread

Basically let’s say 250 up front then 320 including delivery when they are ready

bank details peter carruthers

bsb 112-879

acc 428 965 807

people who want in below (only 9 to go before we order)

1 fatz

2

3

4

5

6

7

8

9

10

Potential

godzilla32

josh type x

endless

sbr

I will most likely be cancelling my interest. I am getting some R33 LCA's and already have adjustable bushes, so I'm hoping that will give me sufficient camber.

1 fatz

2 sbr

3 willis

4 sav man

5 endless

6

7

8

9

10

still need 5 people

to help generate additional interest perhaps we should make a new thread like you suggested earlier. or just change the topic name so that people know it's round 2 ;)

-4 should be achievable with this batch of arms? :)

Edited by Willis
  • 4 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...