Jump to content
SAU Community

Recommended Posts

Hey guys, just wondering, the overnight i drove down to MT Macesondon on the high mountains and was just wondering, my water temp readings were wierd, i wasnt even thrashing it and my temp would go up to 103-106 and i didnt even put my foot down at all when im up high, but when i was driving down normally my temp would eventually drop.... its wierd... my car temp is wierd like its going up and down when i dont even thrash it? I have ordered an ISC radioator hopefully it would make a diffrence...

Also my coolant has been changed 1month ago...

Link to comment
https://www.sau.com.au/forums/topic/270501-water-temp-readings-on-power-fc/
Share on other sites

cool cool, thanks guys, Also just wondering, I ordered an ISC radiator of Ryan, Now before changing it, I would like to change my Thermostat as well, What type of thermo stat would i need to change it ? , just to a standard one or so.

Thanks,

Geraus.

Edited by geraus

hm. i wouldnt go a genuine nissan thermostat. they dont open till 78-81C.

i would go a nismo 62C thermostat. reap the gains

http://justjap.com/store/product.php?produ...=271&page=4

Edited by r33cruiser
hm. i wouldnt go a genuine nissan thermostat. they dont open till 78-81C.

i would go a nismo 62C thermostat. reap the gains

http://justjap.com/store/product.php?produ...=271&page=4

there is no reason you need to run such a low temp thermostat in a street car combine that with a decent radiator and the thing will never be at propper operating temp.

hm. i wouldnt go a genuine nissan thermostat. they dont open till 78-81C.

i would go a nismo 62C thermostat. reap the gains

http://justjap.com/store/product.php?produ...=271&page=4

Id also have to disagree.

They open at 78-81 for a reason.

All your going to do by putting in a cooler thermostat is not let the engine ever warm up properly. And thats not a good thing.

So what "gains" are you "reaping" exactly?

cool cool, thanks guys, Also just wondering, I ordered an ISC radiator of Ryan, Now before changing it, I would like to change my Thermostat as well, What type of thermo stat would i need to change it ? , just to a standard one or so.

Thanks,

Geraus.

stick with a genuine nissan thermostat, i have had nearly 10 dud tridon ones supplied by customers even after trying to convince them otherwise. Now i refuse to fit anything other than genuine.

Check your clutch fan as it sounds like the clutch is giving out.

Edited by URAS

Ok cool, i'll have a look, thanks Trent.

I was looking at the engine bay before, I cannot seem to find the thermostat and the bleed valve... Here are some pictures, If anyone can let me know where it is in the picture , can you guys circle it in red?

dsc00119w.th.jpg

dsc00118x.th.jpg

Ok cool, i'll have a look, thanks Trent.

I was looking at the engine bay before, I cannot seem to find the thermostat and the bleed valve... Here are some pictures, If anyone can let me know where it is in the picture , can you guys circle it in red?

dsc00119w.th.jpg

dsc00118x.th.jpg

follow your bottom rad hose back to the engine, the thermostat is there.

bleeder is front right side of plenum.

post-34927-1242647961_thumb.jpg

Edited by URAS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...