Jump to content
SAU Community

Recommended Posts

I think the whiteline bars are $400 - $500 front and rear.

The thing is that I don't want to make the car grossly uncomfortable so I don't want urethane/nolathane bushes.

I got the shocks and strut bars. There's still some money to be spent on brakes as well.

Car is fine and I have a boring 1,000km run in to look forward to.

T.

Link to comment
https://www.sau.com.au/forums/topic/27167-skyline-handling/#findComment-571998
Share on other sites

Sway bars (actually "anti-roll" bars) stiffen the suspension to prevent weight transfer to the outside wheels during cornering. The beauty of them is that they don't affect the straightline ride comfort, which you would get by fitting heavier shocks / springs to achieve the same result.

You should invest in the nolathane bushes - it will reduce the compliance of the suspension, ie the suspension is less likely to change dynamically from its static settings. But they won't contribute noticably to ride (dis)comfort.

It's generally pretty complex subject. I would suggest you invest a few dollars in some books (1 by Fred Puhl is pretty good at explaining the physics, but gets technical when showing how to calculate all the variables).

Link to comment
https://www.sau.com.au/forums/topic/27167-skyline-handling/#findComment-572130
Share on other sites

First thing you need to do is get someone who knows what they are doing to have a look at the car and see what it is doing now. It may be that nothing is suited and the balance etc is all over the place and even that it is too low now and thus does not allow enough suspension travel.

Mick.

Link to comment
https://www.sau.com.au/forums/topic/27167-skyline-handling/#findComment-572144
Share on other sites

Tony, nolathene bushes won't make the ride uncomfortable - the hard Jap springs are already perfect for doing that :rofl:

As blind_elk says, swaybars are perfect for improving handling without affecting ride comfort. What they basically do is link your left and right suspension arms together. As the outside suspension arm travels upwards in a corner, it pushes the swaybar upwards as well. The swaybar then transfers some of this upwards movement to the inside suspension arm, and the net result is that the outside arm compresses less, and you get less body roll through the corner.

Skylines (and most other cars) already have swaybars, but they're not very thick. Whiteline have stiffer/thicker bars, which do the job better. You usually need a bit of bodyroll though, otherwise your inside wheels will start to lift off mid-corner. Happens to the Bathurst V8's fairly often.

Link to comment
https://www.sau.com.au/forums/topic/27167-skyline-handling/#findComment-572841
Share on other sites

Handling on my car is slightly worse than it used to be.

On my car at least, it's a bit of a double edged sword.

There's 12 or 16 levels of adjustment.

The ride used to be harsh but zero body roll.

Now it's soft and pliable but rolls a fair bit.

So maybe the bars might fix that to some degree.

T.

Link to comment
https://www.sau.com.au/forums/topic/27167-skyline-handling/#findComment-573418
Share on other sites

Way to go is a full Whiteline kit. You might find it a little firm on day one but it is so controlled that the ride soon feels fine, even over bumpy surfaces. I opted for the full version with the nylon bushes and adjustable bars because I use the car for supersprints. It cost around $2200 installed and has been a great investment.

Link to comment
https://www.sau.com.au/forums/topic/27167-skyline-handling/#findComment-575472
Share on other sites

I have full coil over suspension by a company called DORF. Its fully adjustable up and down and soft and hard. Its on the softest setting and its damm bumpy. I mean really bumpy in that if your accelarating and go over a bump your wheels come off the ground. Also while going up my driveway, I have 1 wheel (left rear) in the AIR. The car is so stiff it doesn't have any play. Its great for handling, like a car on rails, and with no body roll.

THe disadvantage apart is that if you try to launch the car it wheelspins majorly.

The major advantage, watch those girlees t i ti es bounce around like mad!

:uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/27167-skyline-handling/#findComment-580858
Share on other sites

I've never really thought about this and can see why soft suspension might seem the best for getting off the line but consider this:

If the car sits right down at the back under heavy accelleration, weight transfer may also cause considerable negative camber and therefore less contact area between the tyre and the road. Camber kits, after all, are designed to minimise negative camber on lowered cars and avoid reducing tyre contact area.

Also, I've never seen a serious drag car with soft suspension...

Link to comment
https://www.sau.com.au/forums/topic/27167-skyline-handling/#findComment-581373
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
×
×
  • Create New...