Jump to content
SAU Community

Recommended Posts

Hks Fcon V pro,

never been used still with the box. Comes with harness.

To suite GTR R33

The HKS F-CON V Pro is a fully featured standalone engine management system that connects as easily as a "piggy-back" fuel and timing controller. As modifications to a vehicle are made, the need for fuel and timing adjustments becomes critical for performance and safety. The F-CON V Pro with its 32x32 resolution for both fuel and timing maps is the optimal solution. The F-CON V Pro can control up to eight injectors and D Jetro or L Jetro setups. --- Injectors can be set to fire as batch, sequentially or staged. The F-CON V Pro can also read drive by wire vehicles. Programming is done via the HKS Power Writer software; which only Certified HKS Pro Dealers have access to. The HKS Power Writer software for the F-CON V Pro has some very unique abilities to simplify setup and tuning. Via the vehicle start up menus most Japanese import cars can be easily started by selecting the vehicle’s parameters (Make, Model, Engine and etc). Tuning is simplified due to the A/F Feedback control; where a target A/F value can be input and the F-CON V Pro will adjust fuel automatically. Also full data logging capabilities are built into the F-Con V Pro Power Writer software. All major vehicle conditions including; speed, rpm, water temperature, intake temperature, timing, boost, injector duty cycle and etc can be logged to an HKS Pro Dealer’s computer. The F-CON V Pro also works seamlessly with electronically controlled transmission.

The F-CON V Pro is a classic example of “best of both worlds”. Retaining and utilising some of the features and function in the stock ECU, tuning time is reduced, hence costs is lowered and drivability is improved, even with real hardcore tuning to the car.

Normal retail at the time of purchase was $2,500 plus. Unit has never been used, so you can be assured it works.

Willing to take a massive price drop to $1,900. ono Please dont throw rediculus offers.

cheers

post-29606-1243412391_thumb.jpgpost-29606-1243412396_thumb.jpg

post-29606-1243412402_thumb.jpgpost-29606-1243412410_thumb.jpg

post-29606-1243412419_thumb.jpgpost-29606-1243412428_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/272022-hks-gold-series-fcon-v-pro/
Share on other sites

  • 3 weeks later...
  • 1 year later...

Not cheap for a second hand unit (going price is usually around the $500 mark due to lack of tuners), but I am interested.

Can you post up a pic of the serial number?

Edited by iamhe77

Considering theres only one licenced shop in all of australian who will tune it for you.

Thats why they are cheap here and no one uses them.

Dude your better off to talk to one of the importers on this site and have them sell it in japan for you mate.You will get more money for it.

Considering theres only one licenced shop in all of australian who will tune it for you.

Thats why they are cheap here and no one uses them.

Dude your better off to talk to one of the importers on this site and have them sell it in japan for you mate.You will get more money for it.

There are authorize tuners in Sydney / Perth and One in Brisbane (GT AUto)Garage who tunes them, so it's not as if there is ONLY 1. but yes very few compared to Power FC and the like

Also you will need to include serial number which is a little sticker on the side.

Considering this thread is a year and a half old...

Lol but serioudly theres plenty of tuners around that are capable, just no one really trys em out cos everyone likes to play it safe and have a bit of thier own tinkling also...

There are 4 i know of in Sydney

TuneHouse Marrickville

ISMotorRacing

Bel Garage

Tom (Old BD4s)

GT Auto in Brissy

XSpeed In Perth

theres plenty there if you look hard enough.

These ecus are magic in the right hands but same can be said about every ecu its all in the tuners knowledge...

Edited by krayzie32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...