Jump to content
SAU Community

Recommended Posts

Hey All

I have been searching for about 4 hours now. I think I went through nearly every topic posted on the entire website. Well, that may be a small exageration on my part. I am looking to upgrade/replace the turbo I currently have in my car and I want to know the quickest/easiest way of doing so. Also, the cheapest.

What I want is a turbo that will just bolt straight on to the existing fittings and lines. I have no idea which one will do the job, I'm guessing someone out there will know exactly which one it is.

My car is a 1995 R33 GTS-T.

Please help, I think my turbo is about to die.

Cheers

Tony

Link to comment
https://www.sau.com.au/forums/topic/272101-bolt-on-turbo/
Share on other sites

Totally depends on

1. Budget

2. Power aim/use of the car

Cheapest isnt always the best, you must understand and accept this as part of your decision.

Once you do that - follow this

1. Read the RB25 dyno sticky thread.

2. Find turbo's that fit your power goal

3. Search with those turbo ID's

4. You will see costs, problems and so on.

There are many many turbo's to choose from. Cheaper ones generally have poor response with OK peak power.

More expensive options generally have great response and great peak power making a very good overall setup.

Also bear in mind larger turbos lead too... and in some cases REQUIRE the following in order of importance

1. Larger Exhaust/Cat

2. Better ECU to tune/make USE of the turbo (no point upgrading turbo on a stock ECU)

3. Larger AFM

4. Larger injectors

So please take the time to address the above points yourself otherwise no-one is really going to be able to help you.

Overall in my opinion you dont really understand whats involved (refer to above points about other parts), so a simple replacement of the stock turbo with another one would be the best option. If your car is stock now and you want to replace the turbo - you have to spend at LEAST another $2,500 to actually make the upgrade any valuble use.

Link to comment
https://www.sau.com.au/forums/topic/272101-bolt-on-turbo/#findComment-4621241
Share on other sites

Overall in my opinion you dont really understand whats involved (refer to above points about other parts), so a simple replacement of the stock turbo with another one would be the best option. If your car is stock now and you want to replace the turbo - you have to spend at LEAST another $2,500 to actually make the upgrade any valuble use.

My apologies, I must have described the whole situation very poorly. All I really want to do is buy a new turbo for my car. I'm not looking for power gains, nor am I looking to lose any power. From the research that I have done, mainly with Garrett Turbos, I have found that they do require for new oil and water lines.

I basically want a new turbo to replace the one that I have. Just one that will bolt straight on with little or no modifications at all.

I hope that makes a bit more sense now.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/272101-bolt-on-turbo/#findComment-4621258
Share on other sites

What mods do you have now though?

And im not sure where you have read that information about Garrett turbos, a large portion of Garrett turbos in a similar frame size are a bolt on affair that use the factory lines. Same as HKS turbos (which are Garretts with a badge and/or minor toying)

Link to comment
https://www.sau.com.au/forums/topic/272101-bolt-on-turbo/#findComment-4621276
Share on other sites

This will be your best bet for what you are describing.

Yep.

If you wanted to spend more for the sake of reliability, you could get your current turbo rebuilt. Or even by a rooted one and get that rebuilt, so your car isnt off the road for too long.

Link to comment
https://www.sau.com.au/forums/topic/272101-bolt-on-turbo/#findComment-4621615
Share on other sites

Hi again

The mods that I currently have are:

3 1/2" cat back exhaust (about to purchase a 3" dump pipe)

Large FMIC

Apexi Pod Filter

Aftermarket Coil Packs

GFB Boost Controller

What makes me think that the turbo is going to die, is the fact that it has been in the car for 14 years now and I think that it is dirty as hell or on the way out. It still manages to boost at around 12PSI though. So I could be wrong.

My other plan was to remove it and give it a massive clean and have it tested to see how bad, or how good, it really is. I was reading the workshop manual that I have and it hints at the point of black soot covering the rear bumper. Apparently it is caused by excessive carbon and sludge build up in the exhaust turbine. Which is why I was thinking of just cleaning it out.

I was thinking about having the current turbo recon'd, but then my missus said to me that I may as well buy a new one.

Link to comment
https://www.sau.com.au/forums/topic/272101-bolt-on-turbo/#findComment-4621845
Share on other sites

What makes me think that the turbo is going to die, is the fact that it has been in the car for 14 years now and I think that it is dirty as hell or on the way out. It still manages to boost at around 12PSI though. So I could be wrong.

If it ain't broke, don't fix it.

Link to comment
https://www.sau.com.au/forums/topic/272101-bolt-on-turbo/#findComment-4622056
Share on other sites

If it ain't broke, don't fix it.

Except your talking about a stock rb25 turbo that are prone to disintegrating when boost is above standard (he states he is running at 12psi)

Our stupid turbines are ceramic bonded to steal....

Here are a couple options.

GCG rebuilt with Garrett components (about $2000) chasers motorworks also offer a similar service

HKS GT-RS kit. (about $3500 imported from japan or add another 1k or so if you buy locally)

and thats about where it ends before your looking at new manifold, dump pipe, etc.

Cheers

Camden

Link to comment
https://www.sau.com.au/forums/topic/272101-bolt-on-turbo/#findComment-4622091
Share on other sites

I was reading the workshop manual that I have and it hints at the point of black soot covering the rear bumper. Apparently it is caused by excessive carbon and sludge build up in the exhaust turbine. Which is why I was thinking of just cleaning it out.

No, that will be due to the fact you have a stock ECU.

The stock ECU is fuelling up hard under load/boost, and this will be causing the build up on the rear bumper.

The exhaust housing/turbine is over 500 degree's... there wont be excessive build up going on there

Link to comment
https://www.sau.com.au/forums/topic/272101-bolt-on-turbo/#findComment-4622231
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...