Jump to content
SAU Community

Recommended Posts

hahahah nice

i like

Let's cut to the chase. I've never been in any car that accelerated as hard as this hairdresser's car and I've been in a lot of fast cars in my time as a speedhunter. Most of the really fast cars I've experienced were race cars of some sort. But this Mazda Roadster is born and bred to be a street car, putting down killer times at the drag strip is just a part time job for this little guy.

Glen should do this conversion

IMG_0791.jpg

This monstrosity is what lays inside the engine bay. It's an RB25DET from a Nissan R34 NEO Skyline. Imagine 711 horsepower and 581 ft/lbs of torque, on Q16 VP race fuel, in a car that weighs in just around 2500 pounds. A Greddy plenum intake manifold sits to opposite to the custom made turbo manifold. A Greddy fuel rail with 660cc Seimen's Deka injects and Greddy intercooler was also installed.

Inside the engine is a set of 87mm Supertech 9:1 forged pistons, ARP headstuds, ARP mainstuds, ACL Calico coated race rod bearings, and a ACL Calico coated race main bearings.

this thread requires non-car related awesome

Russian Ekranoplan

3.jpg

2.jpg

1987 was the year when the first 350 tons ground effect “ship” from the series of Soviet battle missile carriers was produced. It was called Lun after the Russian name for a bird of prey – hen harrier. Another name for this vehicle was Project 903. It carried 6 Moskit cruise missiles (SS-N-22 Sunburn in NATO classification). Hitting four of them causes inevitable sinking of a vessel of any know type and size. The second Lun-class battle aircraft was supposed to be produced in several years but due to the end of cold war and partial disarmament the project was changed to a rescue aircraft and it was never finished.

This type of vehicle called in Russian ekranoplan uses so called ground effect – extra lift of large wings when in proximity to the surface. For this reason they have been designed to travel at a maximum of three meters above the sea but at the same time could provide take off, stable “flight” and safe “landing” in conditions of up to 5-meter waves. These crafts were originally developed by the Soviet Union as high-speed military transports, and were based mostly on the shores of the Caspian Sea and Black Sea. In 2005 crafts of this type have been classified by the International Marine Organization so they probably should be considered flying ships rather than swimming planes. It is also interesting to note that this aircraft is one of the largest ever built, with a length of 73,8 meters (comparing with 73 of Airbus A380).

Lun doesn‘t have a landing gear, only a huge hydroski so there’s no way for it to get on land and for this reason a special floating dry dock was designed for it.

This hybrid vehicle is driven by 8 turbojet engines.

Functionally the body of this strange ship was divided into 4 parts: fore, middle, after-part and keel together with stabilizer. Fore part possesses pilot house and a pillar holding 8 main engines, as well as a room with secondary ones. Middle and after parts were fully equipped with test facilities but still have also a caboose and a toilet. The whole keel is filled with power installation for electricity supply during mooring and a complex of radio navigation and communication equipment. A room for a gunner is placed in a cross-line of keel and stabilizer at a height of 12 meters over the waterline.

The ecranoplan’s crew consisted of 7 officers and 4 warrant officers. It could be absolutely autonomous for 5 days.

58.jpg

Check the link for 3 pages of photos :)

also here is the wiki :thumbsup:

You cant count on the Ruskis for much, but if you are after good vodka or a large floating piece of metal that can destroy 9 titanics and travel real fast, they are the country for the job

yeah, times have really changed.

Back in the day, power came from big cams, big carbs & blowers.........good for the drag strip, shit around town.

Now you throw on a couple of snails with a small cam (V8 OHV) or cams (OHC) and you have not only a drag car, but a grocery getter :huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...