Jump to content
SAU Community

Recommended Posts

Hey guys :wavey: my rb20 turbo engine isn't not running right! :ermm:

It idle's fine but when i try drive it & it hits 2000 rpm it coughs and splatters? :dunno: & blows some blue smoke

any ideas what it could be & how to fix it?

or could it be getting to much fuel or not getting enough??? :dunno:

cheers guys

Blue smoke is bad, usually means oil is leaking into a cylinder.. check your spark plugs and replace if they're fouled up, sounds like head gasket is blown (would piston rings causing coughing and spluttering though?)

Blue smoke is bad, usually means oil is leaking into a cylinder.. check your spark plugs and replace if they're fouled up, sounds like head gasket is blown (would piston rings causing coughing and spluttering though?)

f**k are you serious dude oil is leaking into a cylinder?

how do you see if thats happening?

any way to fix it?

first thing i would do is (when the car is cold) check your oil and coolant. if the coolant or the oil is milky then it is the headgasket. if the oil is black and the coolant is green, you are slightly safe, LOL. if either are low then you could still have an issue. if both are fine then it shouldn't be the headgasket........ but still can't rule it out.

blue smoke is usually oil. white smoke is water and black smoke is unburnt fuel.

water can only really come from the headgasket. however oil can also come from the turbo. i would probably say that your turbo is shot and once it is coming up on boost oil is leaking out the seals and going into the cylinders. this will foul up the plugs and also it doesn't burn as easilly as fuel. to check this pull off one of the intercooler pipes. if there is lots of oil in there it's new turbo time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...